China Factory Free sample Cold Rolled Angle - EN 10130 DC01 Steel 1.0330 cold rolled steel flat sheet - Ruiyi Manufacturer and Supplier | Ruiyi
China Factory Free sample Cold Rolled Angle - EN 10130 DC01 Steel 1.0330 cold rolled steel flat sheet - Ruiyi Manufacturer and Supplier | Ruiyi Detail:
DC01 steel (1.0330 material) is a European standard cold-rolled quality low-carbon steel flat product for cold forming. In BS and DIN EN 10130 standard, it contains 5 other steel grades: DC03 (1.0347), DC04 (1.0338), DC05 (1.0312), DC06 ( 1.0873) and DC07 (1.0898), the surface quality is divided into 2 types: DC01-A and DC01-B. In addition, this steel is also used under electrogalvanizing conditions. The designation of the steel is DC01+ZE (or 1.0330+ZE), and the standard is EN 10152.
DC01 Meaning and Definition
- D: (Drawing) flat products for cold forming
- C: Cold rolled
- DC01: Drawing quality
- DC03: Deep drawing quality;
- DC04, DC05: Special deepdrawing quality;
- DC06: Extra deepdrawing quality;
- DC07: Super deep drawing quality.
- DC01-A: Allow defects that do not affect formability or surface coating, such as pores, slight dents, small marks, slight scratches, and slight coloring.
- DC01-B: Better surfaces shall be free from defects that may affect the uniform appearance of high-quality paints or electrolytic coatings. The other surface should meet at least surface quality A.
- DC01+ZE: Electrolytically zinc coated
- DC01EK: Conventionally enamelled
-
Chemical Composition
DC01 steel chemical composition is listed in the following table based on ladle analysis.
Country (Region) Standard Chemical Composition (ladle analysis), %, ≤ Surface quality Deoxidation Classification Steel name (Steel number) C Mn P S European Union EN 10130 DC01 (1.0330) 0.12 0,60 0,045 0,045 A, B Manufacturer’s discretion Non-alloy quality steel EN 10152 DC01+ZE (1.0330+ZE) A, B EN 10139 DC01-C390, C340, C440, C490, C590, C690 – Notes:
- EN 10130 – Cold rolled low carbon steel flat products;
- EN 10152 – Electrolytically zinc coated cold rolled steel flat products.
- EN 10139 – Cold rolled uncoated low carbon steel narrow strip.
DC01+ZE Steel Mechanical Properties
The table below lists DC01+ZE steel mechanical properties.
-
Mechanical properties, Part-1 Country (Region) Standard Steel name (Steel number) Yield strength (MPa), 0.2 % offset Tensile strength (MPa) Elongation, ≥ % Surface quality Absence of stretcher strain marks European Union EN 10130 DC01 (1.0330) 140 (assumed) -280 270-410 28 A, B – EN 10152 DC01+ZE (1.0330+ZE) 3 months Notes:
- Yield strength: When the thickness is ≤0.7 mm but >0.5 mm, the yield strength value should be increased by 20 MPa. For thicknesses ≤0.5 mm, the value should be increased by 40 MPa.
- Elongation: When the thickness is ≤0.7 mm but >0.5 mm, the minimum value of elongation should be reduced by 2 units. For thicknesses ≤0.5 mm, the minimum value shall be reduced by 4 units.
Mechanical properties, Part-2 Standard Designation Delivery condition Symbol Yield strength (MPa), 0.2 % offset Tensile strength (MPa) Elongation, A80, ≥ % Elongation, A50, ≥ % Hardness, HV Validity of the mechanical properties EN 10139 DC01 (1.0330) Annealed A – 270 – 390 28 30 ≤ 105 3 months Skin passed LC ≤ 280 270 – 410 28 30 ≤ 115 Work hardened C290 200 – 380 290 – 430 18 20 95-125 C340 ≥ 250 340 – 490 Not required Not required 105-155 C390 ≥ 310 390 – 540 117-172 C440 ≥ 360 440 – 590 135-185 C490 ≥ 420 490 – 640 155-200 C590 ≥ 520 590 – 740 185-225 C690 ≥ 630 ≥ 690 ≥ 215 Electrolytic Zinc Coatings
Coating Designation Nominal zinc coating values for each surface Minimum zinc coating values for each surface Thickness, µm Mass, g/m² Thickness, µm Mass, g/m² ZE25/25 2,5 18 1,7 12 ZE50/50 5,0 36 4,1 29 ZE75/75 7,5 54 6,6 47 ZE100/100 10,0 72 9,1 65 DC01+ZE Steel Mass and Density
DC01+ZE steel mass shall be calculated based on the density of steel 7.85 kg/dm³ and the density of zinc coating 7.1 kg/dm³.
Applications
The main application areas of the DC01 material include: automotive industry, construction industry, electronic equipment and home appliance industry, decorative purposes, food canning, etc.
DC01 Steel Equivalent Material
Material 1.0330, DC01 steel equivalent to ASTM, ISO, European (German DIN, British BSI, France NF), Japanese JIS and Chinese GB standard (for reference).
Note: DIN 1623 has been replaced by DIN EN 10130, and the designation ST12 has been replaced by DC01.
Product detail pictures:
Related Product Guide:
Now we have highly developed devices. Our items are exported towards the USA, the UK and so on, enjoying a great popularity among the customers for China Factory Free sample Cold Rolled Angle - EN 10130 DC01 Steel 1.0330 cold rolled steel flat sheet - Ruiyi Manufacturer and Supplier | Ruiyi, The product will supply to all over the world, such as: Irish , azerbaijan , Mauritania , Whether selecting a current product from our catalog or seeking engineering assistance for your application, you can talk to our customer service center about your sourcing requirements. We can provided good quality with competitive price for you personally.
By Bernice
from Rio de Janeiro
- 2018.03.03 13:09
Adhering to the business principle of mutual benefits, we have a happy and successful transaction, we think we will be the best business partner.
By Federico Michael Di Marco
from South Africa
- 2018.12.30 10:21
