Sìona EN10132 Coitcheann SAE1075 stiallach stàilinn gualain fuar CK75 C75 C75S Earrach stiall stàilinn Dèanadair agus solaraiche | Ruiyi
EN10132 Stiall stàilinn gualain fuar-roiligeadh fuar SAE1075CK75C75C75S Stiallan stàilinn an earraich le susbaint gualain de 0.7-0.8% ga fhàgail na stàilinn gualain ioma-adhbhar le deagh fheartan earraich. Mar sin, is e stàilinn gualain a tha air a chleachdadh gu cumanta ann an raon farsaing de thagraidhean innleadaireachd.
SAE1075 noCK75tha 0.7-0.8% gualain, 0.15-0.35% sileaconach, 0.6-0.9% manganese, agus 0.03% fosfar agus sulphur. Tha neart tensile aige de 1230-1340 MPa, neart toraidh 1130-1240 MPa, agus cruas 57-63 HRC.
Tha cruas nas fheàrr aig stàilinn earraich CK75, faodaidh an trast-thomhas cruaidh cruaidh ann an ola ruighinn 100 ~ 150mm. Tha CK75 no C75 Freagarrach airson fuarain glè mhòr a dhèanamh, leithid fuarain dhuilleagan air an càrnadh air inneal-losgaidh, fuarain coil mhòir agus fuarain torsion mòr air soithichean.
Is e stuth stàilinn àrd-charbon a th’ ann an stàilinn earraich CK75. Tha an riochdachadh ceimigeach aige gu ìre mhòr a’ toirt a-steach susbaint gualain (C) eadar 0.70-0.80%, susbaint silicon (Si) eadar 0.10-0.35%, agus susbaint manganese (Mn) eadar 0.60-0.80%. Eadar 0.90%, tha susbaint fosfair (P) agus sulbhur (S) nas lugha na 0.025% fa leth. Tha deagh elasticity agus cruas aig stàilinn earraich CK75 agus gu tric bidh e air a chleachdadh airson fuarain, lannan, lannan sàbhaidh, sgeinean agus pàirtean agus innealan eile a dh’ fheumas neart àrd agus caitheamh caitheamh.
C75 C75s CK75 SAE 1075 earrach stàilinn stiall
1, Cùmhnantan lìbhrigidh:
| Suidheachadh lìbhrigidh | Meudan | Uachdar | Oir |
| 1.Cold Roiligeadh | 1.Thickness: 0.09-8mm | Bright / Snasta / Gorm/Buidhe | Slit |
| 2.Cold Rolled+Hydrogen Annealed | 2.Width: 6-450mm | Cruinn | |
| 3.Cold Rolled+Cruaidh+Tempered | Trast-thomhas coil a-staigh: 300-800mm | Ceàrnag |
2, coimeas ìrean:
| GRAIDEAN COimeas airson Earrach STEEL | ||||||||
| CHINA GB/T | Na Stàitean Aonaichte ASTM | IAPAN. JIS | A' GHEARMACHD DIN | AN FHRAINC NF | BIRTAIN BS | ISO | KOREA KS | TAIWAN CNS |
| 45 | 1045 | S45C | CK45 | XC45 | C45 | |||
| 50 | 1050 | S50C | CK50 | XC50 | 080M50 | C50 | ||
| 60 | 1060 | S60C | CK60 | XC60 | 060A62 | C60 | ||
| 70 | 1070 | S70C | CK70 | XS70 | S70 | |||
| 75 | 1075 | S75C | CK75 | XC75 | C75 | |||
| T10 | W1-9 | SG4 | ||||||
| T9 | W1-8 | SG5 | ||||||
| SG85 | - | SG85 | ||||||
| 40 Mn | 1043 | SWRH42B | 40Mn4 | 40M5 | 080A40 | SL, SM | ||
| 42Mn | ||||||||
| 65 mìle | 1566 | S60C-CSP | CK67 | 080A67 | C60E4 | |||
| 55 Si2Mn | 9255 | SUP 6 /SUP7 | 55 si7 | 55 si7 | 251H60 | 55 SiCr7 | ||
| 60Si2Mn | 9260 | SUP 6 / SUP7 | 65 Si7 | 65 Si7 | 251H60 | 61 SiCr7 | SUP3 | SUP6 |
| 62 Si2Mn | ||||||||
| 75Cr1 | 75Cr1 | 75Cr1 | 75Cr1 | |||||
| 51CrV4 | 5160 | SUP9A | 51CrV4 | 51CrV4 | SPS5A | SUP9A | ||
| 30CrMo | G41300 | SUP13 | 35CrMo4 | SPS9 | SUP13 | |||
| 50 CRVA | 6150 | SUP10 | 51CrV4 | 51CrV4 | 735A51 | 51CrV4 | SPS6 | SUP10 |
3, cumadh ceimigeach:
| Inbhe | Ìre | Co-dhèanamh ceimigeach (%） | ||||||||
| C | Si | Mn | P | S | Cr | Ni | Cu | V | ||
| GB/T699 | 45 | 0.42:0.50 | 0.17 gu 0.37 | 0.50-0.80 | 0.035 | 0.035 | 0.25 | 0.3 | 0.25 | |
| GB/T699 | 50 | 0.47 gu 0.55 | 0.17 gu 0.37 | 0.50-0.80 | 0.035 | 0.035 | 0.25 | 0.3 | 0.25 | |
| GB/T699 | 55 | 0.52:0.60 | 0.17 gu 0.37 | 0.50-0.80 | 0.035 | 0.035 | 0.25 | 0.3 | 0.25 | |
| GB/T699 | 60 | 0.57 gu 0.65 | 0.17 gu 0.37 | 0.50-0.80 | 0.035 | 0.035 | 0.25 | 0.3 | 0.25 | |
| GB/T699 | 65 | 0.62 gu 0.70 | 0.17 gu 0.37 | 0.50-0.80 | 0.035 | 0.035 | 0.25 | 0.3 | 0.25 | |
| GB/T699 | 70 | 0.67 gu 0.75 | 0.17 gu 0.37 | 0.50-0.80 | 0.035 | 0.035 | 0.25 | 0.3 | 0.25 | |
| GB/T699 | 75 | 0.72 gu 0.80 | 0.17 gu 0.37 | 0.50-0.80 | 0.035 | 0.035 | 0.25 | 0.3 | 0.25 | |
| GB/T699 | Mn 40 | 0.37 gu 0.44 | 0.17 gu 0.37 | 0.70 gu 1.00 | 0.035 | 0.035 | 0.25 | 0.3 | 0.25 | |
| GB/T699 | Mn 45 | 0.42:0.50 | 0.17 gu 0.37 | 0.70 gu 1.00 | 0.035 | 0.035 | 0.25 | 0.3 | 0.25 | |
| GB/T699 | Mn65 | 0.62 gu 0.70 | 0.17 gu 0.37 | 0.90 gu 1.20 | 0.035 | 0.035 | 0.25 | 0.3 | 0.25 | |
| GB/T1298 | SK85/SK5 | 0.80 ~ 0.90 | ≤0.35 | ≤0.50 | 0.03 | 0.03 | 0.2 | 0.25 | 0.3 | |
| GB/T1298 | SG4 | 0.95 gu 1.04 | ≤0.35 | ≤0.40 | 0.035 | 0.03 | 0.25 | 0.2 | 0.3 | |
| GB/T3077 | 51CrV4 | 0.47 gu 0.55 | 0.17 gu 0.37 | 0.80 gu 1.10 | 0.035 | 0.035 | 0.90 gu 1.20 | 0.3 | 0.3 | 0.10 gu 0.20 |
| GB/T3077 | 50 CRVA | 0.47 gu 0.54 | 0.17 gu 0.37 | 0.50-0.80 | 0.025 | 0.025 | 0.80 gu 1.10 | 0.3 | 0.3 | 0.10 gu 0.20 |
| GB/T3077 | 75Cr1 | 0.7 gu 0.8 | 0.25 gu 0.5 | 0.50-0.70 | 0.035 | 0.035 | 0.30 gu 0.40 | |||
| GB/T1222 | 55 Si2Mn | 0.52:0.60 | 1.50 gu 2.00 | 0.60-0.90 | ≤0.035 | ≤0.035 | ≤0.35 | ≤0.35 | ≤0.25 | |
| GB/T1222 | 60si2Mn | 0.56 gu 0.64 | 1.50 gu 2.00 | 0.60-0.90 | ≤0.035 | ≤0.035 | ≤0.35 | ≤0.35 | ≤0.25 | |
4, Ar fulangas:
| TOLERNACES THIGHIS | |||||||
| Tighead ainmichte (mm) | W < 125 | 125 <= W | |||||
| A | B | C | A | B | C | ||
| 0,15~0,25 | TS EN | ±0,015 | ±0,012 | ±0,008 | ±0,020 | ±0,015 | ±0,010 |
| STEEL meatailt as àirde | ±0,008 | ±0,010 | |||||
| 0,25~0,40 | TS EN | ±0,020 | ±0,015 | ±0,010 | ±0,025 | ±0,020 | ±0,012 |
| STEEL meatailt as àirde | ±0,010 | ±0,012 | |||||
| 0,40~0,60 | TS EN | ±0,025 | ±0,020 | ±0,012 | ±0,030 | ±0,025 | ±0,015 |
| STEEL meatailt as àirde | ±0,015 | ±0,015 | |||||
| 0,60~1,00 | TS EN | ±0,030 | ±0,025 | ±0,015 | ±0,035 | ±0,030 | ±0,020 |
| STEEL meatailt as àirde | ±0,015 | ±0,020 | |||||
| 1,00~1,50 | TS EN | ±0,035 | ±0,030 | ±0,020 | ±0,040 | ±0,035 | ±0,025 |
| STEEL meatailt as àirde | ±0,020 | ± 0,025 | |||||
| 1,50~2,50 | TS EN | ±0,040 | ±0,035 | ±0,025 | ±0,050 | ±0,040 | ±0,030 |
| STEEL meatailt as àirde | ±0,025 | ±0,030 | |||||
| 2,50~4,00 | TS EN | ±0,050 | ±0,040 | ±0,030 | ±0,060 | ±0,050 | ±0,035 |
| STEEL meatailt as àirde | ±0,030 | ±0,035 | |||||
| Feuch an cuir thu fios thugainn ma tha feumalachdan sònraichte sam bith agad. | |||||||
| LUCHD-LABHAIRT AIRSON SLIT EDGE (GK) | |||||||
| Tolerances leud TS EN 10140 | Leud toraidh (mm) | ||||||
| Tighead ainmichte (mm) | W < 125 | 125 <=W <= 250 | 250 < W | ||||
| A | B | A | B | A | B | ||
| 0,2 ~ 0,6 | TS EN | ± 0,15 | ± 0,10 | ± 0,20 | ± 0,13 | ± 0,25 | ± 0,18 |
| STEEL METAL BARR | ± 0,10 | ±0,13 | ±0,18 | ||||
| 0,6 ~ 1,5 | TS EN | ± 0,20 | ± 0,13 | ± 0,25 | ± 0,18 | ± 0,30 | ± 0,20 |
| STEEL METAL BARR | ±0,13 | ±0,18 | ± 0,20 | ||||
| 1,5 ~ 2,5 | TS EN | ± 0,25 | ± 0,18 | ± 0,30 | ± 0,20 | ± 0,35 | ± 0,25 |
| STEEL METAL BARR | ±0,18 | ± 0,20 | ±0,25 | ||||
| 2,5 ~ 4,0 | TS EN | ± 0,30 | ± 0,20 | ± 0,35 | ± 0,25 | ± 0,40 | ± 0,30 |
| STEEL METAL BARR | ± 0,20 | ±0,25 | ±0,30 | ||||
5, Iarrtasan:
| Inbhe toraidh | Iarrtasan | S50C (CK50/1050) | - A 'tomhas teip | |
| 65 Si2Mn | — An t-Earrach | - Pàirtean structarail de chamarathan | ||
| 50CrV4 | — An t-Earrach | - Pàirtean slabhraidh | ||
| 51CrV4 | — An t-Earrach | — An t-Earrach | ||
| SK4 (1095) | - A 'tomhas teip | - Pàirtean gluasaid | ||
| - lannan ràsair | - Nigheadairean | |||
| - Puingean peann | - Bucaill sàbhailteachd | |||
| - fuarain gaoithe | S55C (CK55/1050) | — An t-Earrach | ||
| — An t-Earrach | - Brògan sàbhailteachd | |||
| — Sgeinean | - Can luchd-fosglaidh | |||
| - Snàthadan fighe | - lannan Thompson | |||
| SK5 (1085) | - A 'tomhas teip | - Pàirtean structarail de chamarathan | ||
| - Tomhais | S60C (CK60/1060) | - Pàirtean slabhraidh | ||
| — An t-Earrach | - Sàibh làimhe airson obair-fiodha | |||
| — Sgeinean | - Brògan sàbhailteachd | |||
| - Snàthadan fighe | — An t-Earrach | |||
| - Còmhlan-sàibh airson obair-fiodha | - Pàirtean uidheamachd oifis | |||
| agus lumbering | - Nigheadairean | |||
| - sàibh cruinn | S65C(65MN/CK67) | - Brògan sàbhailteachd | ||
| - Pàirtean uidheamachd oifis | - Pàirtean gluasaid | |||
| S45C (CK45/1045) | - Pàirtean gluasaid | — An t-Earrach | ||
| - Pàirtean slabhraidh | - Nigheadairean | |||
| - Luchd-gleidhidh | S75C (CK75/1075) | - Pàirtean gluasaid | ||
| - Nigheadairean | — An t-Earrach | |||
| S50C (CK50/1050) | - A 'tomhas teip | - Còmhlan-sàibh | ||
| - Pàirtean structarail de chamarathan |
