Sìona Titanium Plat Dèanadair agus Solaraiche | Ruiyi
Is e pìos còmhnard de mheatailt titanium a th’ ann an truinnsear titanium a bhios gu h-àbhaisteach air a chleachdadh airson diofar thagraidhean gnìomhachais agus innleadaireachd. Tha e ainmeil airson a neart àrd, dùmhlachd ìosal, agus sàr sheasamh an aghaidh creimeadh.
Plataichean titaniumair an cleachdadh gu cumanta ann an gnìomhachas aerospace airson co-phàirtean itealain, leithid pàirtean structarail, gèar tighinn air tìr, agus co-phàirtean einnsean. Bidh iad cuideachd air an cleachdadh anns an raon meidigeach airson implantan lannsa, leithid lannan cnàimh agus ath-chuiridhean còmhla, air sgàth am bith-fhreagarrachd agus an comas a bhith ag amalachadh le stuthan daonna.
A bharrachd air an sin, thathas a’ cleachdadh plataichean titanium ann an gnìomhachas na mara airson togail shoithichean agus structaran far-oirthir, a bharrachd air anns a ’ghnìomhachas ceimigeach agus peitriceimiceach airson uidheamachd agus soithichean a bhios a’ làimhseachadh stuthan creimneach.
Tha pròiseas saothrachaidh truinnsearan titanium a’ toirt a-steach a bhith a ’leaghadh agus a’ gleusadh mèinn titanium ann an cruth spong, a tha an uairsin air a phròiseasadh gu ingotan. Bidh na h-ingots an uairsin air an roiligeadh teth agus air an giullachd tuilleadh tro phròiseasan rolair fuar, annealing, agus crìochnachaidh gus an tiugh agus an uachdar a tha thu ag iarraidh a choileanadh.
Gu h-iomlan, thathas a’ cur luach air truinnsearan titanium airson an cothlamadh de neart, cuideam aotrom, agus strì an aghaidh creimeadh, gan dèanamh nan stuth sùbailte airson raon farsaing de thagraidhean.
Stuth: CP titanium, titanium alloy
Ìre: Gr1, Gr2, Gr4, Gr5, Gr7, Gr9, Gr11, Gr12, Gr16, Gr23 etc
Meud: Tighead: 5～mm, Leud: ≥ 400mm, Fad: ≤ 6000mm
Coitcheann: ASTM B265, AMS 4911, AMS 4902, ASTM F67, ASTM F136 etc
Inbhe: Hot Rolled (R), Fuar Rolled (Y), Annealed (M), Fuasgladh Làimhseachadh (ST)
Bidh sinn sa mhòr-chuid a’ toirt seachad Gr1, Gr2, Gr4, agus ìrean eile de phlàta titanium fìor; agus an truinnsear alloy titanium ann an Gr5, Gr7, Gr9, Gr11, Gr12, Gr16, Gr23, msaa.
Sònrachadh
| Ìre | Inbhe | Sònrachadh | ||
| Gr1, Gr2, Gr4, Gr5, Gr7, Gr9, Gr11, Gr12, Gr16, Gr23 | Rolladh teth (R) Rolled Fuar(Y) Annealed(M) Làimhseachadh fuasglaidh (ST) | Tighead(mm) | Leud (mm) | Fad(mm) |
| 5.0:60 | ≥400 | ≤ 6000 | ||
| Ìre | Co-dhèanamh ceimigeach, cuideam sa cheud (%) | ||||||||||||
| C ≤ | O ≤ | N ≤ | H ≤ | Fe ≤ | Al | V | Pd | Ru | Ni | Mo | Eileamaidean eile Max. gach aon | Eileamaidean eile Max. iomlan | |
| Gr1 | 0.08 | 0.18 | 0.03 | 0.015 | 0.20 | - | - | - | - | - | - | 0.1 | 0.4 |
| Gr2 | 0.08 | 0.25 | 0.03 | 0.015 | 0.30 | - | - | - | - | - | - | 0.1 | 0.4 |
| Gr4 | 0.08 | 0.25 | 0.03 | 0.015 | 0.30 | - | - | - | - | - | - | 0.1 | 0.4 |
| Gr5 | 0.08 | 0.20 | 0.05 | 0.015 | 0.40 | 5.5-6.75 | 3.5-4.5 | - | - | - | - | 0.1 | 0.4 |
| Gr7 | 0.08 | 0.25 | 0.03 | 0.015 | 0.30 | - | - | 0.12 gu 0.25 | - | 0.12 gu 0.25 | - | 0.1 | 0.4 |
| Gr9 | 0.08 | 0.15 | 0.03 | 0.015 | 0.25 | 2.5-3.5 | 2.0 gu 3.0 | - | - | - | - | 0.1 | 0.4 |
| Gr11 | 0.08 | 0.18 | 0.03 | 0.15 | 0.2 | - | - | 0.12 gu 0.25 | - | - | - | 0.1 | 0.4 |
| Gr12 | 0.08 | 0.25 | 0.03 | 0.15 | 0.3 | - | - | - | - | 0.6-0.9 | 0.2 gu 0.4 | 0.1 | 0.4 |
| Gr16 | 0.08 | 0.25 | 0.03 | 0.15 | 0.3 | - | - | 0.04:0.08 | - | - | - | 0.1 | 0.4 |
| Gr23 | 0.08 | 0.13 | 0.03 | 0.125 | 0.25 | 5.5-6.5 | 3.5-4.5 | - | - | - | - | 0.1 | 0.1 |
Feartan fiosaigeach
| Ìre | Feartan fiosaigeach | ||||||
| Neart tensile Min | Neart toraidh (0.2%, air a chothromachadh) | Leudachadh ann an 50mm Min (%) | |||||
| ksi | MPa | Min | Max | ||||
| ksi | MPa | ksi | MPa | ||||
| Gr1 | 35 | 240 | 20 | 138 | 45 | 310 | 24 |
| Gr2 | 50 | 345 | 40 | 275 | 65 | 450 | 20 |
| Gr4 | 80 | 550 | 70 | 483 | 95 | 655 | 15 |
| Gr5 | 130 | 895 | 120 | 828 | - | - | 10 |
| Gr7 | 50 | 345 | 40 | 275 | 65 | 450 | 20 |
| Gr9 | 90 | 620 | 70 | 483 | - | - | 15 |
| Gr11 | 35 | 240 | 20 | 138 | 45 | 310 | 24 |
| Gr12 | 70 | 483 | 50 | 345 | - | - | 18 |
| Gr16 | 50 | 345 | 40 | 275 | 65 | 450 | 20 |
| Gr23 | 120 | 828 | 110 | 759 | - | - | 10 |
Fulangas (mm)
| Tigheadas | Fulangas leud | ||
| 400 ~ 1000 | 1000 ~ 2000 | mu 2000 | |
| 5.0-6.0 | ±0.35 | ±0.40 | ±0.60 |
| 6.0 gu 8.0 | ±0.40 | ±0.60 | ±0.80 |
| 8.0 gu 10.0 | ±0.50 | ±0.60 | ±0.80 |
| 10.0 gu 15.0 | ±0.70 | ±0.80 | ±1.00 |
| 15.0 gu 20.0 | ±0.70 | ±0.90 | ±1.10 |
| 20.0-30.0 | ±0.90 | ±1.00 | ±1.20 |
| 30.0-40.0 | ±1.10 | ±1.20 | ±1.50 |
| 40.0 gu 50.0 | ±1.20 | ±1.50 | ±2.00 |
| 50.0-60.0 | ±1.60 | ±2.00 | ±2.50 |
Deuchainn
An deuchainn ann an ceimigeachd composition
Deuchainn feartan corporra
Sgrùdadh lochdan coltas
Lorgaidh ultrasonach lochdan
Eddy deuchainn an-dràsta
Pacadh
Gus casg a chuir air na truinnsearan titanium bidh bualadh sam bith ann an gluasad no milleadh, mar as trice air am pasgadh le cotan neamhnaid (polyethylene leudachail), agus an uairsin air am pacadh a-steach do chùis fiodha airson an lìbhrigeadh.
