China China Maƙera 2 UNS R50400 Titanium Sheet Plate Maƙera kuma Maroki | Ruwa
Takardar Titanium ta sami tagomashi a masana'antu kamar sararin samaniya, samar da wutar lantarki, petrochemical da motoci. Bayar da ƙarin ƙarfin ƙarfi da ƙananan nauyi, ƙarfin ƙarfin ƙarfi mai ƙarfi tare da ƙarancin zafi yana sa ya dace sosai don kewayon aikace-aikacen injiniya. Takardar Titanium kyakkyawan abu ne don samar da babban adadin abubuwan da aka gyara ta hanyar stamping ko yanke ruwa.
Za'a iya ba da takardar Titanium da farantin karfe zuwa adadin ƙarewar saman daban-daban. Muhimmancin ƙarewar saman an iyakance shi ta hanyar aikace-aikacen da kusanci zuwa ƙarshen yanayin kamar yadda yawanci saman samfuran ƙila ana iya kammala su bayan ƙirƙira ta ƙarshe. Jihar wadata gama gari ita ce gamawar niƙa.
Mun bayar daban-daban surface gama dogara a kan girma da wadata yanayi. Daban-daban nau'ikan ƙarewar saman sune:
- Milled
- goge
- Pickling (rasasshe)
- Goge
- Fashe - Shot / Sand
Kammalawa da wadata jihohi waɗanda ke haifar da filaye daban-daban ba a fayyace su kai tsaye a cikin ma'auni ba don haka sun dogara da yawa ga injin niƙa da yarjejeniyoyin da ke waje da kowane ma'auni. Ma'auni na ASTM B600 shine ma'auni na maɓalli a cikin samar da jagora don ƙaddamarwa da tsaftacewa na titanium da titanium alloys amma baya ayyana sheki, launi ko taurin da saman ya kamata ya samu.
Material: CP titanium, Titanium alloy
Grade: Gr1, Gr2, Gr4, Gr5, Gr7, Gr9, Gr11, Gr12, Gr16, Gr23 da dai sauransu
Girma: Kauri: 0.3 ~ 5mm, Nisa: 400 ~ 3000mm, Tsawon: ≤6000mm
Standard: ASTM B265, AMS 4911, AMS 4902, ASTM F67, ASTM F136 da dai sauransu
Matsayi: Hot Rolled (R), Cold Rolled (Y), Annealed (M), Maganin Magani (ST)
Titanium sheet da farantin ana amfani da su a masana'antu a yau, tare da mafi mashahuri maki kasancewa 2 da 5.
Darasi na 2 Titanium
Mataki na 2 shine tsantsar titanium mai tsaftar kasuwanci da ake amfani dashi a yawancin masana'antar sarrafa sinadarai kuma mai sanyi ne. Faranti 2 da takarda na iya samun ƙarfi na ƙarshe a sama da 40,000 psi.
Darasi na 5 Titanium
Mataki na 5 shine darajar sararin samaniya kuma ba sanyi ba ne, don haka ana amfani da shi sau da yawa lokacin da ba a buƙatar ƙirƙirar ba. Alamar sararin samaniya ta 5 za ta sami ƙarfi na ƙarshe a sama da 120,000 psi.
Kamfaninmu yana samar da nada titanium da takardar titanium. Muna da ɗimbin zanen titanium a hannun jari. Ana iya yanke wannan a cikin nau'i-nau'i daban-daban bisa ga bukatun abokin ciniki, yana rage girman lokacin bayarwa.
Mu yafi samar da tsantsa titanium takardar Gr1, Gr2, Gr4 maki; Domin titanium gami takardar, Mu yafi samar da Gr5, Gr7, Gr9, Gr11, Gr12, Gr16, Gr23 da sauran maki.
Aikace-aikace
Ana amfani da shi wajen samar da na'urar musayar zafi, hasumiya, tukunyar amsawa.
Ana amfani da shi wajen samar da kayan haɗin ƙarfe na ƙarfe.
Ana amfani dashi a masana'antar tagulla ta electrolytic.
Ana amfani dashi don samar da raga na titanium.
| UNS No. |
| UNS No. | |||
| Gr1 | Saukewa: R50250 | CP-Ti | Gr11 | Saukewa: R52250 | Ti-0.15Pd |
| Gr2 | Saukewa: R50400 | CP-Ti | Gr12 | Saukewa: R53400 | Ti-0.3Mo-0.8Ni |
| Gr4 | Saukewa: R50700 | CP-Ti | Gr16 | Saukewa: R52402 | Ti-0.05Pd |
| Gr7 | Saukewa: R52400 | Ti-0.20Pd | Gr23 | Saukewa: R56407 | Ti-6Al-4V ELI |
| Gr9 | Saukewa: R56320 | Ti-3Al-2.5V |
|
| |
Ƙayyadaddun bayanai
| Daraja | Matsayi | Ƙayyadaddun bayanai | ||
| Gr1,Gr2,Gr4,Gr5,Gr7,Gr9,Gr11, Gr12,Gr16,Gr23 | Hot Rolled(R) Cold Rolled(Y) Annealed(M) Maganin Magani (ST) | Kauri (mm) | Nisa (mm) | Tsawon (mm) |
| 0.3 zuwa 5.0 | 400 ~ 3000 | 1000 ~ 6000 | ||
Abubuwan sinadaran
| Daraja | Abubuwan sinadaran, kashi dari (%) | ||||||||||||
| C ≤ | O ≤ | N ≤ | H ≤ | Fe ≤ | Al | V | Pd | Ru | Ni | Mo | Sauran Abubuwan Max. kowanne | Sauran Abubuwan Max. duka | |
| Gr1 | 0.08 | 0.18 | 0.03 | 0.015 | 0.20 | - | - | - | - | - | - | 0.1 | 0.4 |
| Gr2 | 0.08 | 0.25 | 0.03 | 0.015 | 0.30 | - | - | - | - | - | - | 0.1 | 0.4 |
| Gr4 | 0.08 | 0.25 | 0.03 | 0.015 | 0.30 | - | - | - | - | - | - | 0.1 | 0.4 |
| Gr5 | 0.08 | 0.20 | 0.05 | 0.015 | 0.40 | 5.5 zuwa 6.75 | 3.5 zuwa 4.5 | - | - | - | - | 0.1 | 0.4 |
| Gr7 | 0.08 | 0.25 | 0.03 | 0.015 | 0.30 | - | - | 0.12 zuwa 0.25 | - | 0.12 zuwa 0.25 | - | 0.1 | 0.4 |
| Gr9 | 0.08 | 0.15 | 0.03 | 0.015 | 0.25 | 2.5 zuwa 3.5 | 2.0 zuwa 3.0 | - | - | - | - | 0.1 | 0.4 |
| Gr11 | 0.08 | 0.18 | 0.03 | 0.15 | 0.2 | - | - | 0.12 zuwa 0.25 | - | - | - | 0.1 | 0.4 |
| Gr12 | 0.08 | 0.25 | 0.03 | 0.15 | 0.3 | - | - | - | - | 0.6 ～ 0.9 | 0.2 zuwa 0.4 | 0.1 | 0.4 |
| Gr16 | 0.08 | 0.25 | 0.03 | 0.15 | 0.3 | - | - | 0.04 zuwa 0.08 | - | - | - | 0.1 | 0.4 |
| Gr23 | 0.08 | 0.13 | 0.03 | 0.125 | 0.25 | 5.5 zuwa 6.5 | 3.5 zuwa 4.5 | - | - | - | - | 0.1 | 0.1 |
Kaddarorin jiki
| Daraja | Kaddarorin jiki | ||||||||
| Ƙarfin ƙarfi Min | Ƙarfin bayarwa (0.2%, kashewa) | Tsawaitawa ku 50mm Min (%) | Lanƙwasa Gwajin (Radius na Mandrel) | ||||||
| ksi | MPa | min | max | 1.8mm A cikin kauri | 1.8mm ~ 4.57mm A cikin kauri | ||||
| ksi | MPa | ksi | MPa | ||||||
| Gr1 | 35 | 240 | 20 | 138 | 45 | 310 | 24 | 1.5T | 2T |
| Gr2 | 50 | 345 | 40 | 275 | 65 | 450 | 20 | 2T | 2.5T |
| Gr4 | 80 | 550 | 70 | 483 | 95 | 655 | 15 | 2.5T | 3T |
| Gr5 | 130 | 895 | 120 | 828 | - | - | 10 | 4.5T | 5T |
| Gr7 | 50 | 345 | 40 | 275 | 65 | 450 | 20 | 2T | 2.5T |
| Gr9 | 90 | 620 | 70 | 483 | - | - | 15 | 2.5T | 3T |
| Gr11 | 35 | 240 | 20 | 138 | 45 | 310 | 24 | 1.5T | 2T |
| Gr12 | 70 | 483 | 50 | 345 | - | - | 18 | 2T | 2.5T |
| Gr16 | 50 | 345 | 40 | 275 | 65 | 450 | 20 | 2T | 2.5T |
| Gr23 | 120 | 828 | 110 | 759 | - | - | 10 | 4.5T | 5T |
Haƙuri (mm)
| Kauri | Haƙuri mai faɗi | |
| 400 ~ 1000 | · 1000 | |
| 0.3 zuwa 0.5 | ± 0.05 | ± 0.05 |
| 0.5 zuwa 0.8 | ± 0.07 | ± 0.07 |
| 0.8 zuwa 1.1 | ± 0.09 | ± 0.09 |
| 1.1-1.5 | ± 0.11 | ± 0.13 |
| 1.5 zuwa 2.0 | ± 0.15 | ± 0.16 |
| 2.0 zuwa 3.0 | ± 0.18 | ± 0.20 |
| 3.0 zuwa 4.0 | ± 0.22 | ± 0.22 |
| 4.0 ~ 5.0 | ± 0.35 | ± 0.35 |
Gwaji
Gwajin abun ciki na sinadarai
Gwajin kaddarorin jiki
Duban lahani
Gano aibi na Ultrasonic
Gwajin Eddy na yanzu
Marufi
Domin kauce wa titanium zanen gado da wani karo a wucewa ko lalacewa, yawanci nannade da lu'u-lu'u auduga (expandable polyethylene), sa'an nan cushe a cikin katako akwati domin bayarwa.
