1050 1060 1100 aluminum okirikiri Onye nrụpụta na onye na-ebubata ya

Nkọwapụta ngwaahịa okirikiri aluminom:

• Alloy: 1050, 1060, 1070, 1100, 3002, 3003, 3004, 5052A, 5052, 5754, 6061
• Isi ike: O, H12, H14, H16, H18
• Ọkpụrụkpụ: 0.012 ″ – 0.15 ″ (0.3mm – 4mm)
• Dayameta: 3.94″ – 38.5″ (80mm-2000mm)
• Elu: Achachapụrụ, Na-egbuke egbuke, Anodized
• Ihe eji eme ihe: Kwesịrị ekwesị maka ịme ite, pans, trays pizza, achịcha achịcha, achịcha achicha, mkpuchi, kettles, basins, fryers, light reflectors
• Stamping Materials Gụnyere: ígwè, galvanized ígwè, aluminum, aluminum alloy na ndị ọzọ ọla

1. Ọkpụrụkpụ: The ọkpụrụkpụ nke aluminum wafers n'ozuzu ranges si 0.2mm ka 10mm. Nhọrọ nke ọkpụrụkpụ a kapịrị ọnụ na-adabere na ihe eji chọrọ na ọnọdụ usoro.

2. Dayameta: The dayameta nke aluminom okirikiri nwere ike hazie n'ime dị iche iche nha dị ka mkpa, na dayameta nso bụ na-emekarị n'etiti 5mm na 2000mm.

3. Ihe: Ihe ndị a na-emekarị nke diski aluminom gụnyere 1050, 1060, 1100, 3003, 5052 na 6061 usoro. Ihe dị iche iche nwere kemịkalụ dị iche iche na akụrụngwa anụ ahụ ma ọ dị mkpa ka ahọpụtara ya dịka ebe eji eme ihe.

4. Ngwọta dị n'elu: Aluminom wafers nwere ike ịdị n'elu na-emeso ya site na anodizing, eserese electrophoretic, spraying, frosting, wdg iji meziwanye njedebe elu, nkwụsị nke corrosion, ike ike elu na ihe ndị ọzọ nke aluminom wafers.

5. Nhazi teknụzụ: Enwere ike ịhazi diski aluminom site na ịkpụ, ịkụ ọkpọ, ịkpụ, ịpị, mpịakọta na usoro nhazi ndị ọzọ, a pụkwara ịmepụta ya na ngwaahịa nke nha na ụdị dị iche iche.

Diski aluminom bụ ihe ọla a na-ejikarị eme ihe nwere ihe ndị mara mma dị ka ọkụ, ike siri ike na nguzogide corrosion.

A pụkwara ịgwọta ya na nhazi ya, a na-ejikwa ya n'ọtụtụ ebe n'ihe owuwu, ụgbọ njem, igwe, ngwá electronic na mpaghara ndị ọzọ.

Ihe na-esonụ bụ mmalite nke ojiji na nkọwapụta nke diski aluminom.

1.Ogige ihe owuwu:Enwere ike iji diski aluminom mee ihe dị ka ihe mgbidi mgbidi ụlọ. Enwere ike ịme ha n'ụdị dị iche iche, dị ọkụ ma mara mma, nwere ike iguzogide ifufe siri ike, oké mmiri ozuzo, anyanwụ na ọnọdụ ihu igwe ndị ọzọ, ọ gaghịkwa eme ka corrosion, nrụrụ, wdg maka iji ogologo oge mee ihe.

N'otu oge ahụ, a pụkwara iji diski aluminom mee ihe dị ka ihe ịchọ mma n'ime ime, nke a na-eme n'ụdị dị iche iche, nke mara mma ma mara mma, nwere ike ime ka mmetụta nke oghere ahụ dịkwuo elu, ma bụrụkwa ihe mgbochi mmiri na ọkụ.

2.Ebe njem:Enwere ike iji okirikiri aluminom mee ihe dị ka akụkụ maka ụgbọ ala ndị dị ka ụgbọ ala, ụgbọ oloko, ụgbọ mmiri, wdg N'ihi na diski aluminom nwere uru nke ịdị arọ dị arọ, ike dị elu, nguzogide corrosion, wdg, ha nwere ike belata ibu nke ụgbọ ala ma melite nchekwa. nke ụgbọ ala. , ọsọ na anwụ ngwa ngwa.

N'otu oge ahụ, a pụkwara iji diski aluminom mee ihe dị ka nkebi, decks, superstructures na ihe ndị ọzọ nke ụgbọ mmiri, na-enwe ezigbo mmiri na-eguzogide na ikuku ikuku.

3.Mpaghara igwe: Aluminom diskienwere ike iji ya dị ka akụkụ ígwè ọrụ, okporo ígwè nduzi, bearings, wdg N'ihi na diski aluminom nwere nguzogide dị mma, nguzogide corrosion na eletriki eletrik, ha nwere ike izute mkpa dị iche iche nke ụlọ ọrụ na-emepụta ígwè na kwa Ọ nwere ike ibelata ịdị arọ nke ígwè ọrụ ma melite. arụmọrụ nke igwe.

4.Ebe eletrọnịkị: Aluminom diskienwere ike iji ya dị ka ihe bụ isi nke electrolytic capacitors. Ha nwere njirimara nke elu conductivity, obere njupụta, na ezigbo nkwụsi ike nke kemịkal, ma nwee ike gboo mkpa nke iji mee ihe na ugboro ugboro na okpomọkụ dị elu.

N'otu oge ahụ, a pụkwara iji diski aluminom mee ihe dị ka ihe ndị na-ekpo ọkụ ọkụ eletrik, nke nwere ike imebi okpomọkụ nke ọma, belata okpomọkụ nke ngwa eletriki, ma melite arụmọrụ nke ngwa eletriki.

5. Ogige ụgbọ mmiri nrụgide: Aluminom diskienwere ike iji ya mee ihe dị ka isi ihe nke arịa nrụgide. Ha nwere ike iguzogide oke nrụgide na oke okpomọkụ.

Ha nwekwara ezigbo nguzogide corrosion ma nwee ike gboo mkpa nke ụlọ ọrụ dị iche iche, dị ka petrochemicals, nchekwa gas na ụgbọ njem, yana akụrụngwa ahụike, wdg.