China China Grade 2 UNS R50400 Titanium Sheet Plate Produsen lan Supplier | Ruiyi
Lembaran titanium wis ditemokake ing industri kayata aerospace, pembangkit listrik, petrokimia lan otomotif. Nawakake kekuatan ekstra-dhuwur lan bobot kurang, kekuatan tarik dhuwur wesi digabungake karo transfer panas kurang ndadekake iku cocog banget kanggo sawetara aplikasi engineering. Lembaran titanium minangka bahan sing apik kanggo produksi komponen kanthi volume dhuwur kanthi stamping utawa nglereni waterjet.
Lembaran lan piring titanium bisa diwenehake menyang macem-macem permukaan sing beda. Pentinge rampung permukaan umume ditemtokake dening aplikasi lan cedhak karo negara rampung amarga biasane permukaan produk bisa rampung sawise fabrikasi pungkasan. Negara pasokan umum yaiku finish pabrik anil.
We offer macem-macem Rampung lumahing gumantung ukuran lan kahanan sumber. Macem-macem jinis finishing permukaan yaiku:
- giling
- polesan
- Pickling (descaled)
- disikat
- Blasted – Shot / Sand
Rampung lan negara pasokan sing nyebabake permukaan sing beda-beda ora ditetepake sacara eksplisit ing standar lan mulane gumantung banget marang pabrik individu lan persetujuan ing njaba standar apa wae. Standar ASTM B600 minangka standar utama kanggo menehi pandhuan kanggo ngresiki lan ngresiki titanium lan wesi titanium nanging ora nemtokake gloss, warna utawa kasar sing kudu diduweni permukaan.
Bahan: CP titanium, paduan titanium
Kelas: Gr1, Gr2, Gr4, Gr5, Gr7, Gr9, Gr11, Gr12, Gr16, Gr23 etc
Ukuran: Ketebalan: 0,3 ~ 5mm, Jembar: 400 ~ 3000mm, Dawane: ≤6000mm
Standar: ASTM B265, AMS 4911, AMS 4902, ASTM F67, ASTM F136 etc
Status: Hot Rolled (R), Cold Rolled (Y), Annealed (M), Solution treatment (ST)
Lembaran lan piring titanium umume digunakake ing manufaktur saiki, kanthi gelar paling populer yaiku 2 lan 5.
Kelas 2 Titanium
Kelas 2 minangka titanium murni komersial sing digunakake ing sebagian besar pabrik pangolahan kimia lan bisa dibentuk kanthi adhem. Plat lan lembaran kelas 2 bisa duwe kekuatan tarik paling dhuwur ing lan ndhuwur 40.000 psi.
Kelas 5 Titanium
Kelas 5 minangka kelas aeroangkasa lan ora bisa dibentuk, mula luwih asring digunakake nalika ora ana pambentukan. Paduan aerospace kelas 5 bakal nduweni kekuatan tarik paling dhuwur ing lan ndhuwur 120.000 psi.
Perusahaan kita nyedhiyakake gulungan titanium lan lembaran titanium. Kita duwe akeh lembaran titanium ing saham. Sing bisa dipotong ing macem-macem ukuran miturut kabutuhan customer, nemen shorten wektu pangiriman.
We utamané nyedhiyani sheet titanium murni saka Gr1, Gr2, Gr4 gelar; Kanggo titanium alloy sheet, We utamané nyedhiyani Gr5, Gr7, Gr9, Gr11, Gr12, Gr16, Gr23 lan gelar liyane.
Aplikasi
Digunakake ing produksi penukar panas, menara, ketel reaksi.
Digunakake ing produksi bahan komposit logam.
Digunakake ing industri tembaga elektrolitik.
Digunakake kanggo ngasilake bolong titanium.
| UNS No. |
| UNS No. | |||
| Gr1 | UNS R50250 | CP-Ti | Gr11 | UNS R52250 | Ti-0.15 Pd |
| Gr2 | UNS R50400 | CP-Ti | Gr12 | UNS R53400 | Ti-0.3Mo-0.8Ni |
| Gr4 | UNS R50700 | CP-Ti | Gr16 | UNS R52402 | Ti-0.05Pd |
| Gr7 | UNS R52400 | Ti-0.20 Pd | Gr23 | UNS R56407 | Ti-6Al-4V ELI |
| Gr9 | UNS R56320 | Ti-3Al-2.5V |
|
| |
Spesifikasi
| sasmita | Status | Spesifikasi | ||
| Gr1, Gr2, Gr4, Gr5, Gr7, Gr9, Gr11, Gr12, Gr16, Gr23 | Hot Rolled (R) Cold Rolled (Y) Annealed (M) Pengobatan solusi (ST) | Ketebalan (mm) | Jembar (mm) | dawa (mm) |
| 0.3~5.0 | 400~3000 | 1000~6000 | ||
Komposisi kimia
| sasmita | Komposisi kimia, persen bobot (%) | ||||||||||||
| C ≤ | O ≤ | N ≤ | H ≤ | Fe ≤ | Al | V | Pd | Ru | Ni | Mo | Unsur liyane Maks. saben | Unsur liyane Maks. gunggung | |
| Gr1 | 0.08 | 0.18 | 0.03 | 0.015 | 0.20 | — | — | — | — | — | — | 0.1 | 0.4 |
| Gr2 | 0.08 | 0.25 | 0.03 | 0.015 | 0.30 | — | — | — | — | — | — | 0.1 | 0.4 |
| Gr4 | 0.08 | 0.25 | 0.03 | 0.015 | 0.30 | — | — | — | — | — | — | 0.1 | 0.4 |
| Gr5 | 0.08 | 0.20 | 0.05 | 0.015 | 0.40 | 5.5~6.75 | 3.5~4.5 | — | — | — | — | 0.1 | 0.4 |
| Gr7 | 0.08 | 0.25 | 0.03 | 0.015 | 0.30 | — | — | 0.12~0.25 | — | 0.12~0.25 | — | 0.1 | 0.4 |
| Gr9 | 0.08 | 0.15 | 0.03 | 0.015 | 0.25 | 2.5~3.5 | 2.0~3.0 | — | — | — | — | 0.1 | 0.4 |
| Gr11 | 0.08 | 0.18 | 0.03 | 0.15 | 0.2 | — | — | 0.12~0.25 | — | — | — | 0.1 | 0.4 |
| Gr12 | 0.08 | 0.25 | 0.03 | 0.15 | 0.3 | — | — | — | — | 0.6～ 0.9 | 0.2~0.4 | 0.1 | 0.4 |
| Gr16 | 0.08 | 0.25 | 0.03 | 0.15 | 0.3 | — | — | 0.04-0.08 | — | — | — | 0.1 | 0.4 |
| Gr23 | 0.08 | 0.13 | 0.03 | 0.125 | 0.25 | 5.5~6.5 | 3.5~4.5 | — | — | — | — | 0.1 | 0.1 |
Sifat fisik
| sasmita | Sifat fisik | ||||||||
| Kekuwatan tensile Min | kekuatan ngasilaken (0,2%, offset) | Elongation ing 50mm Min (%) | Tes Bend (Radius Mandrel) | ||||||
| ksi | MPa | min | maks | <1,8 mm Ing kekandelan | 1.8mm ~ 4.57mm Ing kekandelan | ||||
| ksi | MPa | ksi | MPa | ||||||
| Gr1 | 35 | 240 | 20 | 138 | 45 | 310 | 24 | 1.5T | 2T |
| Gr2 | 50 | 345 | 40 | 275 | 65 | 450 | 20 | 2T | 2.5T |
| Gr4 | 80 | 550 | 70 | 483 | 95 | 655 | 15 | 2.5T | 3T |
| Gr5 | 130 | 895 | 120 | 828 | — | — | 10 | 4.5T | 5T |
| Gr7 | 50 | 345 | 40 | 275 | 65 | 450 | 20 | 2T | 2.5T |
| Gr9 | 90 | 620 | 70 | 483 | — | — | 15 | 2.5T | 3T |
| Gr11 | 35 | 240 | 20 | 138 | 45 | 310 | 24 | 1.5T | 2T |
| Gr12 | 70 | 483 | 50 | 345 | — | — | 18 | 2T | 2.5T |
| Gr16 | 50 | 345 | 40 | 275 | 65 | 450 | 20 | 2T | 2.5T |
| Gr23 | 120 | 828 | 110 | 759 | — | — | 10 | 4.5T | 5T |
Toleransi (mm)
| kekandelan | Toleransi jembar | |
| 400~1000 | > 1000 | |
| 0.3-0.5 | ± 0,05 | ± 0,05 |
| 0.5-0.8 | ± 0,07 | ± 0,07 |
| 0.8~1.1 | ± 0,09 | ± 0,09 |
| 1.1~1.5 | ± 0,11 | ± 0,13 |
| 1.5~2.0 | ± 0,15 | ± 0,16 |
| 2.0~3.0 | ± 0,18 | ± 0,20 |
| 3.0-4.0 | ± 0,22 | ± 0,22 |
| 4.0~5.0 | ± 0,35 | ± 0,35 |
Testing
Tes komposisi kimia
Tes sifat fisik
Inspeksi cacat katon
Deteksi cacat ultrasonik
Eddy saiki testing
Kemasan
Supaya sheets titanium duwe tabrakan ing transit utawa karusakan, biasane kebungkus katun mutiara (polyethylene expandable), lan banjur dikempalken menyang cilik kayu kanggo pangiriman.
