China EN10132 SAE1075 Standard SAE1075 frigoris involutus carbonis habena CK75 C75 C75S Vere steel strip Manufacturer and Supplier | Ruiyi
EN10132 Standard SAE1075 frigidum involutum carbonis chalybem habenaCK75C75C75S ver ferro habena contentum carbonis habet 0.7-0.8% faciens illud chalybe carbonis multi-proposito cum bonis veris proprietatibus. Ergo in amplis applicationibus operandi usus est chalybe carbonis communis.
SAE1075 orCK75continet carbonem 0.7-0.8%, 0.15-0.35% silicon, 0.6-0.9% manganum, et 0.03% phosphorus et sulphur. Industriam vim habet 1230-1340 MPa, cede robur 1130-1240 MPa, et duritia 57-63 HRC.
CK75 ferrum vere duritiem melius habet, diam in oleo durabilius 100~ 150mm attingere potest. CK75 vel C75 Apta est ad fontes maximos faciendos, ut in bullis dorsalibus folium reclinatum, magnae spirae et magnae torsionis in navibus.
CK75 ferrum vere est materia alta carbonis ferrum. Eius compositio chemica maxime includit carbo (C) contentum inter 0.70-0.80%, silicon (Si) contentum inter 0.10-0.35%, et manganesum (Mn) contentum inter 0.60-0.80%. Inter 0,90%, contenta phosphori (P) et sulphuris (S) minora sunt quam 0.025% respective. CK75 ferrum vere bonam elasticitatem et duritiem habet et saepe usus est ad fontes, laminas, laminas, cultros, aliaque membra et instrumenta, quae altam fortitudinem requirunt et resistentiam gerunt.
C75 C75s CK75 SAE 1075
1, Conditiones:
| Traditio Conditio | Magnitudines | Superficies | Ore |
| 1.Cold Rolled | 1.Thickness: 0.09-8mm | Splendida / politum / Caeruleum/Yellow | Slit |
| 2. Cold involutum Hydrogenium Annaled | 2. Width: 6-450mm | Circum | |
| 3.Cold involutus+induratus+Temperatus | Coil interiorem diam: 300-800mm | Quadratus |
II, De Gradibus comparatio;
| GRADUM COMPARATIO PRO FERRUM | ||||||||
| SINARUM GB/T | USA ASTM | Iaponia JIS | GERMANIAM DIN | GALLIAM NF | BINTAIN BS | ISO | KOREA KS | TAIWAN CNS |
| 45 | 1045 | S45C | CK45 | XC45 | C45 | |||
| 50 | 1050 | S50C | CK50 | XC50 | 080M50 | C50 | ||
| 60 | 1060 | S60C | CK60 | XC60 | 060A62 | C60 | ||
| 70 | 1070 | S70C | CK70 | XS70 | S70 | |||
| 75 | 1075 | S75C | CK75 | XC75 | C75 | |||
| T10 | W1-9 | SK4 | ||||||
| T9 | W1-8 | SK5 | ||||||
| SK85 | - | SK85 | ||||||
| 40Mn | 1043 | SWRH42B | 40Mn4 | 40M5 | 080A40 | SL, SM | ||
| 42Mn | ||||||||
| 65Mn | 1566 | S60C-CSP | CK67 | 080A67 | C60E4 | |||
| 55Si2Mn | 9255 | SUP 6 //SUP7 | 55Si7 | 55Si7 | 251H60 | 55SiCr7 | ||
| 60Si2Mn | 9260 | SUP 6 / SUP7 | 65Si7 | 65Si7 | 251H60 | 61SiCr7 | SUP3 | SUP6 |
| 62Si2Mn | ||||||||
| 75Cr1 | 75Cr1 | 75Cr1 | 75Cr1 | |||||
| 51CrV4 | 5160 | SUP9A | 51CrV4 | 51CrV4 | SPS5A | SUP9A | ||
| 30CrMo | G41300 | SUP13 | 35CrMo4 | SPS9 | SUP13 | |||
| 50CrVA | 6150 | SUP10 | 51CrV4 | 51CrV4 | 735A51 | 51CrV4 | SPS6 | SUP10 |
3, Chemical Compositio:
| Standard | Gradus | Chemical Composition（%） | ||||||||
| C | Si | Mn | P | S | Cr | Ni | Cu | V | ||
| GB/T699 | 45 | 0.42～0.50 | 0.17～0.37 | 0.50～0.80 | 0.035 | 0.035 | 0.25 | 0.3 | 0.25 | |
| GB/T699 | 50 | 0.47～0.55 | 0.17～0.37 | 0.50～0.80 | 0.035 | 0.035 | 0.25 | 0.3 | 0.25 | |
| GB/T699 | 55 | 0.52～0.60 | 0.17～0.37 | 0.50～0.80 | 0.035 | 0.035 | 0.25 | 0.3 | 0.25 | |
| GB/T699 | 60 | 0.570.65 | 0.17～0.37 | 0.50～0.80 | 0.035 | 0.035 | 0.25 | 0.3 | 0.25 | |
| GB/T699 | 65 | 0.62～0.70 | 0.17～0.37 | 0.50～0.80 | 0.035 | 0.035 | 0.25 | 0.3 | 0.25 | |
| GB/T699 | 70 | 0.670.75 | 0.17～0.37 | 0.50～0.80 | 0.035 | 0.035 | 0.25 | 0.3 | 0.25 | |
| GB/T699 | 75 | 0.72～0.80 | 0.17～0.37 | 0.50～0.80 | 0.035 | 0.035 | 0.25 | 0.3 | 0.25 | |
| GB/T699 | Mn40 | 0.37～0.44 | 0.17～0.37 | 0.70～1.00 | 0.035 | 0.035 | 0.25 | 0.3 | 0.25 | |
| GB/T699 | Mn45 | 0.42～0.50 | 0.17～0.37 | 0.70～1.00 | 0.035 | 0.035 | 0.25 | 0.3 | 0.25 | |
| GB/T699 | Mn65 | 0.62～0.70 | 0.17～0.37 | 0.90～1.20 | 0.035 | 0.035 | 0.25 | 0.3 | 0.25 | |
| GB/T1298 | SK85/SK5 | 0.80 ~0.90 | ≤0.35 | ≤0.50 | 0.03 | 0.03 | 0.2 | 0.25 | 0.3 | |
| GB/T1298 | SK4 | 0.95～1.04 | ≤0.35 | ≤0.40 | 0.035 | 0.03 | 0.25 | 0.2 | 0.3 | |
| GB/T3077 | 51CrV4 | 0.47～0.55 | 0.17～0.37 | 0.80～1.10 | 0.035 | 0.035 | 0.90～1.20 | 0.3 | 0.3 | 0.10～0.20 |
| GB/T3077 | 50CrVA | 0.47～0.54 | 0.17～0.37 | 0.50～0.80 | 0.025 | 0.025 | 0.80～1.10 | 0.3 | 0.3 | 0.10～0.20 |
| GB/T3077 | 75Cr1 | 0.7～0.8 | 0.25～0.5 | 0.50～0.70 | 0.035 | 0.035 | 0.30～0.40 | |||
| GB/T1222 | 55Si2Mn | 0.52～0.60 | 1.50～2.00 | 0.60～0.90 | ≤0.035 | ≤0.035 | ≤0.35 | ≤0.35 | ≤0.25 | |
| GB/T1222 | 60si2Mn | 0.56～0.64 | 1.50～2.00 | 0.60～0.90 | ≤0.035 | ≤0.035 | ≤0.35 | ≤0.35 | ≤0.25 | |
4;
| CRASSITUDO TOLERNACES | |||||||
| Crassitudo nominal (mm) | W < 125 | 125 <= W | |||||
| A | B | C | A | B | C | ||
| 0,15~0,25 | TS EN | ±0,015 | ±0,012 | ± 0.008 | ± 0,020 | ±0,015 | ± 0,010 |
| Top Metal STEEL | ± 0.008 | ± 0,010 | |||||
| 0,25~0,40 | TS EN | ± 0,020 | ±0,015 | ± 0,010 | ± 0,025 | ± 0,020 | ±0,012 |
| Top Metal STEEL | ± 0,010 | ±0,012 | |||||
| 0,40~0,60 | TS EN | ± 0,025 | ± 0,020 | ±0,012 | ± 0,030 | ± 0,025 | ±0,015 |
| Top Metal STEEL | ±0,015 | ±0,015 | |||||
| 0,60~ 1,00 | TS EN | ± 0,030 | ± 0,025 | ±0,015 | ± 0,035 | ± 0,030 | ± 0,020 |
| Top Metal STEEL | ±0,015 | ± 0,020 | |||||
| 1,00~ 1,50 | TS EN | ± 0,035 | ± 0,030 | ± 0,020 | ± 0,040 | ± 0,035 | ± 0,025 |
| Top Metal STEEL | ± 0,020 | ± 0,025 | |||||
| 1,50~ 2,50 | TS EN | ± 0,040 | ± 0,035 | ± 0,025 | ± 0,050 | ± 0,040 | ± 0,030 |
| Top Metal STEEL | ± 0,025 | ± 0,030 | |||||
| 2,50~ 4,00 | TS EN | ± 0,050 | ± 0,040 | ± 0,030 | ± 0,060 | ± 0,050 | ± 0,035 |
| Top Metal STEEL | ± 0,030 | ± 0,035 | |||||
| Quaeso, contact us si quid speciale requisitum habes. | |||||||
| AMPLITUDO tolerances ORA (GK) | |||||||
| Latitudo Tolerantiae TS EN 10140 | Productio Latitudo (mm) | ||||||
| Crassitudo nominal (mm) | W < 125 | 125 <= W <= 250 | 250 < W | ||||
| A | B | A | B | A | B | ||
| 0,2 ~ 0,6 | TS EN | ± 0,15 | ± 0,10 | ± 0,20 | ± 0,13 | ± 0,25 | ± 0,18 |
| TOP ARGENTUM CHALYBE | ± 0,10 | ± 0,13 | ± 0,18 | ||||
| 0,6 ~ 1,5 | TS EN | ± 0,20 | ± 0,13 | ± 0,25 | ± 0,18 | ± 0,30 | ± 0,20 |
| TOP ARGENTUM CHALYBE | ± 0,13 | ± 0,18 | ± 0,20 | ||||
| 1,5~ 2,5 | TS EN | ± 0,25 | ± 0,18 | ± 0,30 | ± 0,20 | ± 0,35 | ± 0,25 |
| TOP ARGENTUM CHALYBE | ± 0,18 | ± 0,20 | ± 0,25 | ||||
| 2,5 ~ 4,0 | TS EN | ± 0,30 | ± 0,20 | ± 0,35 | ± 0,25 | ± 0,40 | ± 0,30 |
| TOP ARGENTUM CHALYBE | ± 0,20 | ± 0,25 | ± 0,30 | ||||
V, Applications:
| Product vexillum | Applications | S50C(CK50/1050) | - funiculus mensuræ | |
| 65Si2Mn | - Fontes | - partes structurae cameras | ||
| 50CrV4 | - Fontes | - Chain parts | ||
| 51CrV4 | - Fontes | - Fontes | ||
| SK4 (1095) | - funiculus mensuræ | - Clutch partes | ||
| - novacula laminae | - Washers | |||
| - Pen puncta | - Safety fibulas aeneas | |||
| - Ventus-sursum fontes | S55C(CK55/1050) | - Fontes | ||
| - Fontes | - Safety calceamenta | |||
| - Cutlery | - Can openers | |||
| - Knitting acus | - Thompson laminae | |||
| SK5 (1085) | - funiculus mensuræ | - partes structurae cameras | ||
| - Gauges | S60C(CK60/1060) | - Chain parts | ||
| - Fontes | - manus serrat ad woodworking | |||
| - Cutlery | - Safety calceamenta | |||
| - Knitting acus | - Fontes | |||
| - Band serrat pro woodworking | - officium apparatu partes | |||
| et elumbering | - Washers | |||
| - Circum serrat | S65C(65MN/CK67) | - Safety calceamenta | ||
| - officium apparatu partes | - Clutch partes | |||
| S45C(CK45/1045) | - Clutch partes | - Fontes | ||
| - Chain parts | - Washers | |||
| - Retainers | S75C(CK75/1075) | - Clutch partes | ||
| - Washers | - Fontes | |||
| S50C(CK50/1050) | - funiculus mensuræ | - Band serrat | ||
| - partes structurae cameras |
