China Titanium sheet Manufacturer le Supplier | Ruiyi
Letlapa la titaniume bua ka sekotoana se tšesaane, se bataletseng sa tšepe ea titanium. E sebelisoa hangata liindastering tse fapaneng ka lebaka la thepa ea eona e ikhethang, ho kenyeletsoa matla a holimo, letsoalo le tlase, le ho hanyetsa ho hotle ho hoholo.Letlapa la titaniumHangata li sebelisoa sebakeng sa lifofane, likoloi, tsa metsing le lits'ebetsong tsa lik'hemik'hale, moo lisebelisoa tse bobebe le tse tšoarellang li hlokahalang. Li ka boela tsa sebetsoa le ho etsoa ka libopeho le libopeho tse fapaneng, joalo ka lipoleiti, li-foil kapa li-strip, ho latela litlhoko tse khethehileng tsa morero.
Lipoleiti tsa titanium hangata li sebelisoa indastering ea sepakapaka bakeng sa likarolo tsa lifofane, joalo ka likarolo tsa sebopeho, lisebelisoa tsa ho lisa, le likarolo tsa enjene. Li boetse li sebelisoa lefapheng la bongaka bakeng sa li-implants tsa opereishene, joalo ka lipoleiti tsa masapo le liphatlalatso tse kopaneng, ka lebaka la biocompatibility ea tsona le bokhoni ba ho kopanya le lisele tsa motho.
Ntle le moo, lipoleiti tsa titanium li sebelisoa indastering ea likepe bakeng sa ho aha likepe le meaho ea kantle ho naha, hammoho le indastering ea lik'hemik'hale le tsa petrochemical bakeng sa lisebelisoa le likepe tse sebetsanang le lintho tse senyang.
Mokhoa oa ho etsa lipoleiti tsa titanium o akarelletsa ho qhibiliha le ho hloekisoa ha tšepe ea titanium hore e be seponche, ebe se fetoloa hore e be li-ingots. Joale li-ingots li chesoa ebe li sebetsoa ka mokhoa o batang oa ho phutholla, ho kolobisoa, le ho phethela ho fihlela botenya bo lakatsehang le bokaholimo ba bokaholimo.
Ka kakaretso, lipoleiti tsa titanium li nkoa e le tsa bohlokoa bakeng sa motsoako oa tsona oa matla, boima bo bobebe, le ho hanyetsa ha kutu, e leng se etsang hore e be thepa e ka sebelisoang ka mefuta e mengata ea lisebelisoa.
lintho tse bonahalang: CP titanium, motsoako oa Titanium
Kereiti: Gr1, Gr2, Gr4, Gr5, Gr7, Gr9, Gr11, Gr12, Gr16, Gr23 joalo-joalo
Boholo: Botenya: 5～mm, Bophara: ≥ 400mm, Bolelele: ≤ 6000mm
Maemo: ASTM B265, AMS 4911, AMS 4902, ASTM F67, ASTM F136 joalo-joalo.
Boemo: Ho Fetisitsoe (R), Cold Rolled(Y), Annealed (M), Phekolo ea tharollo (ST)
Re fana haholo ka Gr1, Gr2, Gr4, le limaraka tse ling tsa poleiti ea titanium e hloekileng; le poleiti ea alloy ea titanium ho Gr5, Gr7, Gr9, Gr11, Gr12, Gr16, Gr23, joalo-joalo.
Tlhaloso
| Kereiti | Boemo | Tlhaloso | ||
| Gr1,Gr2,Gr4,Gr5,Gr7,Gr9,Gr11, Gr12,Gr16,Gr23 | Ho Qhaseha (R) Cold Rolled(Y) Annealed(M) Phekolo ea tharollo(ST) | Botenya(mm) | Bophara(mm) | Bolelele(mm) |
| 5.0–60 | ≥400 | ≤ 6000 | ||
| Kereiti | Sebopeho sa lik'hemik'hale, peresente ea boima ba 'mele (%) | ||||||||||||
| C ≤ | O ≤ | N ≤ | H ≤ | Fe ≤ | Al | V | Pd | Ru | Ni | Mo | Lintlha Tse Ling Max. enngwe le enngwe | Lintlha Tse Ling Max. kakaretso | |
| Gr1 | 0.08 | 0.18 | 0.03 | 0.015 | 0.20 | - | - | - | - | - | - | 0.1 | 0.4 |
| Gr2 | 0.08 | 0.25 | 0.03 | 0.015 | 0.30 | - | - | - | - | - | - | 0.1 | 0.4 |
| Gr4 | 0.08 | 0.25 | 0.03 | 0.015 | 0.30 | - | - | - | - | - | - | 0.1 | 0.4 |
| Gr5 | 0.08 | 0.20 | 0.05 | 0.015 | 0.40 | 5.5 ho isa ho 6.75 | 3.5 ho isa ho 4.5 | - | - | - | - | 0.1 | 0.4 |
| Gr7 | 0.08 | 0.25 | 0.03 | 0.015 | 0.30 | - | - | 0.12–0.25 | - | 0.12–0.25 | - | 0.1 | 0.4 |
| Gr9 | 0.08 | 0.15 | 0.03 | 0.015 | 0.25 | 2.5 ho isa ho 3.5 | 2.0–3.0 | - | - | - | - | 0.1 | 0.4 |
| Gr11 | 0.08 | 0.18 | 0.03 | 0.15 | 0.2 | - | - | 0.12–0.25 | - | - | - | 0.1 | 0.4 |
| Gr12 | 0.08 | 0.25 | 0.03 | 0.15 | 0.3 | - | - | - | - | 0.6–0.9 | 0.2–0.4 | 0.1 | 0.4 |
| Gr16 | 0.08 | 0.25 | 0.03 | 0.15 | 0.3 | - | - | 0.04–0.08 | - | - | - | 0.1 | 0.4 |
| Gr23 | 0.08 | 0.13 | 0.03 | 0.125 | 0.25 | 5.5 ho isa ho 6.5 | 3.5 ho isa ho 4.5 | - | - | - | - | 0.1 | 0.1 |
Lintho tsa 'mele
| Kereiti | Lintho tsa 'mele | ||||||
| Matla a tsitsipano Min | Ho hlahisa matla (0.2%, offset) | Elongation ka 50mm Min (%) | |||||
| ksi | MPa | Min | Max | ||||
| ksi | MPa | ksi | MPa | ||||
| Gr1 | 35 | 240 | 20 | 138 | 45 | 310 | 24 |
| Gr2 | 50 | 345 | 40 | 275 | 65 | 450 | 20 |
| Gr4 | 80 | 550 | 70 | 483 | 95 | 655 | 15 |
| Gr5 | 130 | 895 | 120 | 828 | - | - | 10 |
| Gr7 | 50 | 345 | 40 | 275 | 65 | 450 | 20 |
| Gr9 | 90 | 620 | 70 | 483 | - | - | 15 |
| Gr11 | 35 | 240 | 20 | 138 | 45 | 310 | 24 |
| Gr12 | 70 | 483 | 50 | 345 | - | - | 18 |
| Gr16 | 50 | 345 | 40 | 275 | 65 | 450 | 20 |
| Gr23 | 120 | 828 | 110 | 759 | - | - | 10 |
Mamello (mm)
| Botenya | Ho mamellana ka bophara | ||
| 400 ~ 1000 | 1000 ~ 2000 | ＞2000 | |
| 5.0–6.0 | ±0.35 | ±0.40 | ±0.60 |
| 6.0–8.0 | ±0.40 | ±0.60 | ±0.80 |
| 8.0–10.0 | ±0.50 | ±0.60 | ±0.80 |
| 10.0–15.0 | ±0.70 | ±0.80 | ±1.00 |
| 15.0–20.0 | ±0.70 | ±0.90 | ±1.10 |
| 20.0–30.0 | ±0.90 | ±1.00 | ±1.20 |
| 30.0–40.0 | ±1.10 | ±1.20 | ±1.50 |
| 40.0–50.0 | ±1.20 | ±1.50 | ±2.00 |
| 50.0–60.0 | ±1.60 | ±2.00 | ±2.50 |
Teko
Teko ea sebopeho sa lik'hemik'hale
Teko ea thepa ea 'mele
Tlhahlobo ea liphoso tsa ponahalo
Ho lemoha liphoso tsa Ultrasonic
Eddy tlhahlobo ea hajoale
Lipoleiti tsa Titanium li na le mefuta e mengata ea ts'ebeliso ka lebaka la thepa ea tsona e ikhethang, ho kenyeletsoa karo-karolelano e phahameng ea boima ba 'mele, ho hanyetsa kutu, le biocompatibility. Lisebelisoa tse ling tse tloaelehileng tsa lipoleiti tsa titanium li kenyelletsa:
1. Indasteri ea sepakapaka: Lipoleiti tsa Titanium li sebelisoa haholo indastering ea sepakapaka bakeng sa likarolo tsa lifofane, tse kang mapheo, fuselage le likarolo tsa enjene. Mofuta o bobebe oa titanium o thusa ho fokotsa tšebeliso ea mafura le ho eketsa ts'ebetso ea sefofane.
2. Li-implants tsa bongaka: Hangata lipoleiti tsa Titanium li sebelisoa lefapheng la bongaka bakeng sa ho kenngoa ha masapo, tse kang lipoleiti tsa masapo, li-screw le li-implants tsa meno. Biocompatibility ea Titanium le bokhoni ba ho hokahana le lesapo la motho li etsa hore e be khetho e nepahetseng bakeng sa lits'ebetso tse joalo.
3. Ts'ebetso ea lik'hemik'hale: Lipoleiti tsa Titanium li sebelisoa liindastering tsa ho sebetsana le lik'hemik'hale ka lebaka la ho hanyetsa ha tsona ho matla ha kutu. Li sebelisoa lisebelisoa tse kang li-heaters tsa mocheso, li-reactors le litanka tsa polokelo, moo li khonang ho mamella lik'hemik'hale tse matla le mocheso o phahameng.
4. Indasteri ea metsing: Lipoleiti tsa Titanium li fumana lisebelisoa indastering ea leoatle ka lebaka la ho hanyetsa ha tsona ho bola ha metsi a letsoai. Li sebelisoa bakeng sa likepe tsa likepe, li-propeller shafts, le likarolo tse ling tse pepesehileng metsing a leoatle.
5. Thepa ea lipapali: Ho sebelisoa lipoleiti tsa Titanium ha ho etsoa thepa ea lipapali, tse kang lirekete tsa thenese, lihlooho tsa lihlopha tsa kolofo le liforeimi tsa libaesekele. Matla a bobebe le a phahameng a titanium a ntlafatsa ts'ebetso le ho tšoarella.
6. Indasteri ea likoloi: Lipoleiti tsa Titanium li sebelisoa lits'ebetsong tsa likoloi ho fokotsa boima ba 'mele le ho ntlafatsa katleho ea mafura. Ba hiriloe litsamaisong tsa mouoane, lisebelisoa tsa enjene le likarolo tse emisitsoeng.
7. Mehaho: Lipoleiti tsa Titanium li sebelisoa lits'ebetsong tsa meralo bakeng sa boipiletso ba tsona bo botle le ho tšoarella nako e telele. Li ka sebelisoa bakeng sa ho koahela, ho rulela, le likarolo tsa façade mehahong.
8. Ho hlahisa matla: Lipoleiti tsa Titanium li sebelisoa lifemeng tsa motlakase, haholo-holo lifemeng tsa ho ntša letsoai, ka lebaka la ho hana ho bola le matla a ho mamella mocheso o phahameng le likhatello.
Ka kakaretso, lipoleiti tsa titanium ke lisebelisoa tse feto-fetohang tse fumanehang liindastering tse fapaneng moo boima bo bobebe, ho hanyetsa kutu le matla e leng lintlha tsa bohlokoa.
