Cina titanium plat Produsén jeung Supplier | Ruiyi
Plat titanium mangrupikeun sapotong datar tina logam titanium anu biasana dianggo pikeun sagala rupa aplikasi industri sareng rékayasa. Éta dipikanyaho pikeun kakuatan anu luhur, dénsitas rendah, sareng résistansi korosi anu saé.
pelat titaniumBiasana dianggo dina industri aerospace pikeun komponén pesawat, sapertos bagian struktural, gear badarat, sareng komponen mesin. Éta ogé dipaké dina widang médis pikeun implants bedah, kayaning pelat tulang jeung ngagantian gabungan, alatan biocompatibility maranéhanana jeung kamampuhan pikeun ngahijikeun jeung jaringan manusa.
Salaku tambahan, pelat titanium dianggo dina industri laut pikeun ngawangun kapal sareng struktur lepas pantai, ogé dina industri kimia sareng pétrokimia pikeun alat sareng kapal anu nanganan zat korosif.
Prosés manufaktur pelat titanium ngalibatkeun lebur sarta pemurnian bijih titanium kana formulir bolu, nu lajeng diolah jadi ingot. Ingots lajeng panas digulung sarta salajengna diolah ngaliwatan rolling tiis, annealing, sarta prosés pagawean pikeun ngahontal ketebalan nu dipikahoyong tur permukaan finish.
Gemblengna, pelat titanium hargana pikeun kombinasi kakuatan, hampang, sareng résistansi korosi, ngajantenkeun bahan anu serbaguna pikeun rupa-rupa aplikasi.
Bahan: CP titanium, alloy titanium
Kelas: Gr1, Gr2, Gr4, Gr5, Gr7, Gr9, Gr11, Gr12, Gr16, Gr23 jsb
Ukuran: Kandel: 5～mm, Lebar: ≥ 400mm, Panjang: ≤ 6000mm
Standar: ASTM B265, AMS 4911, AMS 4902, ASTM F67, ASTM F136 jsb
Status: Hot Rolled (R), Cold Rolled (Y), Annealed (M), Solution treatment (ST)
Urang utamana nyadiakeun Gr1, Gr2, Gr4, sarta sasmita séjén plat titanium murni; jeung plat alloy titanium di Gr5, Gr7, Gr9, Gr11, Gr12, Gr16, Gr23, jsb.
Spésifikasi
| Kelas | Status | Spésifikasi | ||
| Gr1, Gr2, Gr4, Gr5, Gr7, Gr9, Gr11, Gr12, Gr16, Gr23 | Hot Rolled (Urang Sunda) Cold Rolled(Y) Annealed(M) Pangobatan solusi (ST) | Ketebalan (mm) | Lebar (mm) | Panjangna (mm) |
| 5.0～60 | ≥400 | ≤ 6000 | ||
| Kelas | Komposisi kimia, persén beurat (%) | ||||||||||||
| C ≤ | O ≤ | N ≤ | H ≤ | Fe ≤ | Al | V | Pd | Ru | Ni | Mo | Unsur séjén Max. masing-masing | Unsur séjén Max. total | |
| Gr1 | 0.08 | 0.18 | 0.03 | 0,015 | 0.20 | — | — | — | — | — | — | 0.1 | 0.4 |
| Gr2 | 0.08 | 0.25 | 0.03 | 0,015 | 0.30 | — | — | — | — | — | — | 0.1 | 0.4 |
| Gr4 | 0.08 | 0.25 | 0.03 | 0,015 | 0.30 | — | — | — | — | — | — | 0.1 | 0.4 |
| Gr5 | 0.08 | 0.20 | 0.05 | 0,015 | 0.40 | 5.5～6.75 | 3.5～4.5 | — | — | — | — | 0.1 | 0.4 |
| Gr7 | 0.08 | 0.25 | 0.03 | 0,015 | 0.30 | — | — | 0.12～0.25 | — | 0.12～0.25 | — | 0.1 | 0.4 |
| Gr9 | 0.08 | 0.15 | 0.03 | 0,015 | 0.25 | 2.5～3.5 | 2.0～3.0 | — | — | — | — | 0.1 | 0.4 |
| Gr11 | 0.08 | 0.18 | 0.03 | 0.15 | 0.2 | — | — | 0.12～0.25 | — | — | — | 0.1 | 0.4 |
| Gr12 | 0.08 | 0.25 | 0.03 | 0.15 | 0.3 | — | — | — | — | 0.6~0.9 | 0.2~0.4 | 0.1 | 0.4 |
| Gr16 | 0.08 | 0.25 | 0.03 | 0.15 | 0.3 | — | — | 0.04～0.08 | — | — | — | 0.1 | 0.4 |
| Gr23 | 0.08 | 0.13 | 0.03 | 0.125 | 0.25 | 5.5~6.5 | 3.5～4.5 | — | — | — | — | 0.1 | 0.1 |
sipat fisik
| Kelas | sipat fisik | ||||||
| Kakuatan tensile Min | kakuatan ngahasilkeun (0,2%, offset) | Elongation dina 50mm Min (%) | |||||
| ksi | MPa | Min | Max | ||||
| ksi | MPa | ksi | MPa | ||||
| Gr1 | 35 | 240 | 20 | 138 | 45 | 310 | 24 |
| Gr2 | 50 | 345 | 40 | 275 | 65 | 450 | 20 |
| Gr4 | 80 | 550 | 70 | 483 | 95 | 655 | 15 |
| Gr5 | 130 | 895 | 120 | 828 | — | — | 10 |
| Gr7 | 50 | 345 | 40 | 275 | 65 | 450 | 20 |
| Gr9 | 90 | 620 | 70 | 483 | — | — | 15 |
| Gr11 | 35 | 240 | 20 | 138 | 45 | 310 | 24 |
| Gr12 | 70 | 483 | 50 | 345 | — | — | 18 |
| Gr16 | 50 | 345 | 40 | 275 | 65 | 450 | 20 |
| Gr23 | 120 | 828 | 110 | 759 | — | — | 10 |
Kasabaran (mm)
| Kandelna | Toléransi lebar | ||
| 400~1000 | 1000~2000 | > 2000 | |
| 5.0～6.0 | ± 0,35 | ± 0,40 | ± 0,60 |
| 6.0～8.0 | ± 0,40 | ± 0,60 | ± 0,80 |
| 8.0～10.0 | ± 0,50 | ± 0,60 | ± 0,80 |
| 10.0～15.0 | ± 0,70 | ± 0,80 | ± 1.00 |
| 15.0～20.0 | ± 0,70 | ± 0,90 | ± 1.10 |
| 20.0～30.0 | ± 0,90 | ± 1.00 | ± 1.20 |
| 30.0～40.0 | ± 1.10 | ± 1.20 | ± 1,50 |
| 40.0～50.0 | ± 1.20 | ± 1,50 | ± 2.00 |
| 50.0～60.0 | ± 1,60 | ± 2.00 | ± 2,50 |
Nguji
Uji komposisi kimiawi
Uji sipat fisik
Inspeksi defects penampilan
Deteksi cacad ultrasonik
Eddy nguji ayeuna
Bungkusan
Pikeun ngahindarkeun pelat titanium aya tabrakan dina transit atanapi karusakan, biasana dibungkus ku katun mutiara (poliétilén anu tiasa digedékeun), teras dibungkus kana kotak kayu pikeun pangiriman.
