China DC01 Cold rolled steel sheet coil DIN EN 10130 10209 DIN 1623 Manufacturers and Supplier | Ruiyi

Inkcazelo emfutshane:

Intsimbi EQONGILEYO IPHEPHA KUNYE NEKOYILI – (DC01 BS EN 10130:2006)

Intsimbi eqengqelekayo ebandayo, (edla ngokubizwa ngokuba yiNbanda encitshisiweyo okanye CR), yimveliso yekhabhoni ephantsi, eveliswa kusetyenziswa ekrwada impahla ezifana coke kunye namalahle at intsimbi amashishini ehlabathini lonke.

DC01 intsimbi (1.0330 impahla) ngumgangatho waseYurophu opholileyo oqengqelekayo ophantsi kwekhabhoni intsimbi imveliso tyaba yokwenza ebandayo. … Ukongeza, oku intsimbi ikwasetyenziswa phantsi kweemeko ze-electrogalvanizing. Ukutyunjwa kwe intsimbi yi DC01+ZE (okanye 1.0330+ZE), kwaye umgangatho yi-EN 10152

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Iithegi zeMveliso

Intsimbi epholileyo eqengqelekayo ngokwe-DIN EN 10130, 10209 kunye neDIN 1623
Omnye wababoneleli beMild Steel Strip eTshayina, enikezela ngeDC01 kwiDIN EN 10139, iCold rolled engagqutywanga iMild Steel Strip yokwenza ukubanda, BS 1449 CS1, DC03 ukuya kwiDIN EN 10139, iCold rolled engafakwanga iMild Steel Strip, iBS ebandayo 1449 CS1/CS3 kunye ne-DC06 ukuya kwi-DIN EN 10139, i-Cold rolled engagqutywanga iMild Steel Strip yokwenza ukubanda, BS 1449 CS4

Idatha yobugcisa

Intsimbi epholileyo eqengqelekayo ngokwe-DIN EN 10130, 10209 kunye neDIN 1623

Umgangatho	Isikhokelo sovavanyo	Izinto eziphathekayo-Nombolo.	Indawo yesivuno Rp0,2 (MPa)	Amandla okuqina Rm (MPA)	Elongation A80 (kwi%) min.	r-Ixabiso 90 ° min.	n-Ixabiso 90° min.	Inkcazelo endala
DC01	Q	1.0330	≤280	270 – 410	28			St 12-03
DC03	Q	1.0347	≤240	270 – 370	34	1,30		St 13-03
DC04	Q	1.0338	≤210	270 – 350	38	1,60	0,18	St 14-03
DC05	Q	1.0312	≤180	270 – 330	40	1,90	0,20	St 15-03
DC06	Q	1.0873	≤170	270 – 330	41	2,10	0,22
DC07	Q	1.0898	≤150	250 – 310	44	2,50	0,23

Umgangatho	Isikhokelo sovavanyo	Izinto eziphathekayo-Nombolo.	Indawo yesivuno Rp0,2 (MPa)	Amandla okuqina Rm (MPA)	Elongation A80 (kwi%) min.	r-Ixabiso 90 ° min.	n-Ixabiso 90° min.
DC01EK	Q	1.0390	≤270	270 – 390	30
DC04EK	Q	1.0392	≤220	270 – 350	36
DC05EK	Q	1.0386	≤220	270 – 350	36	1,50
DC06EK	Q	1.0869	≤190	270 – 350	38	1,60
DC03ED	Q	1.0399	≤240	270 – 370	34
DC04ED	Q	1.0394	≤210	270 – 350	38
DC06ED	Q	1.0872	≤190	270 – 350	38	1,60

Umgangatho	Isikhokelo sovavanyo	Izinto eziphathekayo-Nombolo.	Indawo yesivuno Rp0,2 (MPa)	Amandla okuqinaRm (MPA)	Elongation A80 (kwi%) min.	I-DIN 1623 T2 (endala)
S215G	Q	1.0116G	≥215	360 - 510	20	St 37-3G
S245G	Q	1.0144G	≥245	430 – 580	18	St 44-3G
S325G	Q	1.0570G	≥325	510 – 680	16	St 52-3G

Intsimbi epholileyo eqengqelekayo ikwayinxalenye yepotfoliyo yethu yemveliso. Intsimbi epholileyo eqengqelekayo igqwesile ekwenzeni okubandayo. Eli qela lemveliso labela amabanga DC01 ukuya ku-DC07, DC01EK ukuya kwi-DC06EK, DC03ED ukuya ku-DC06ED kunye ne-S215G ukuya kwi-S325G.

Amabakala ahlelwa ngokowona mandla aphezulu avumelekileyo esivuno kwaye anokwahlulwa ngolu hlobo lulandelayo.
DC01 – Eli bakala lingasetyenziselwa ukwenza umsebenzi olula, umzekelo, ukugoba, ukufaka amaso, ukutsala nokutsala kusetyenziswa.
DC03 – Eli bakala likulungele ukwenza iimfuno ezinjengomzobo onzulu kunye neeprofayile ezinzima ezifanelekileyo.
DC04 – Lo mgangatho ufanelekile kwiimfuno zoguliso oluphezulu.
DC05 – Eli bakala le-thermoforming lilungele iimfuno zokubumba eziphezulu.
DC06 – Lo mzobo ubunzulu obukhethekileyo ubunjani bufanele eyona mfuno iphezulu yotshintsho.
DC07 – Lo mgangatho womzobo unzulu kakhulu ufanelekile kwiimfuno zoguquko olugqithisileyo.

Amanqaku ane-enameled
Amabakala ensimbi i-DC01EK, i-DC04EK kunye ne-DC06EK ifanelekile kwi-enamelling eqhelekileyo ye-single-layer okanye i-double-layer.

Amabakala ensimbi i-DC06ED, i-DE04ED kunye ne-DC06ED ifanelekile kwi-enamelling ngokuthe ngqo kunye ne-enamelling ngokweendlela ezimbini / indlela yokudubula enye kunye nezicelo ezikhethekileyo ze-enamelling ezimbini ze-enamelling eziphantsi.

Uhlobo lomphezulu

Umphezulu A
Iimpazamo ezinjengama-pores, ama-grooves amancinci, ama-warts amancinci, ama-warts amancinci kunye nokuguqulwa kwebala elincinane elingachaphazeli ukukwazi ukubunjwa kwakhona kunye nokunamathela kwiingubo zomphezulu zivunyelwe.

Umphezulu B
Icala elingcono kufuneka likhululeke kwiziphene ukwenzela ukuba ukubonakala okulinganayo komgangatho ogqityiweyo okanye isambatho esifakwe nge-electrolytically singonakali. Elinye icala kufuneka ubuncinane lihlangabezane neemfuno zodidi lomphezulu A.

Ukugqitywa komphezulu
Umphezulu wokugqiba unokuba mtyibilizi, ube buthuntu okanye urhabaxa. Ukuba akukho zinkcukacha zinikiweyo xa uodola, ukugqitywa komphezulu kuya kuhanjiswa kwi-matt finish. Iziqendu ezine zomphezulu ezidweliswe zihambelana namaxabiso obunzima beziko kwitheyibhile elandelayo kwaye kufuneka ivavanywe ngokuhambelana ne-EN 10049.

Ukugqitywa komphezulu	uphawu	Umyinge wokugqitywa komphezulu (ixabiso lomda: 0,8mm)
Iflethi ekhethekileyo	b	Ra ≤ 0,4 µm
flat	g	Ra ≤ 0,9 µm
Mat	m	0,60 µm ˂ Ra ≤ 1,9 µm
rhabaxa	r	Ra ≤ 1,6 µm