China UNS T30407 ASTM A681 umgunyathi umsebenzi obandayo D7 Isixhobo Steel bar Umenzi kunye noMboneleli | Ruiyi
Intsimbi yokubumba eshushu i-D7yintsimbi esetyenziswa ngokuqhelekileyo, kwaye iinxalenye zayo eziphambili ziyi-carbon (C), i-chromium (Cr), i-molybdenum (Mo), i-manganese (Mn) kunye ne-silicon (Si). Ubume bayo beekhemikhali kunye neempawu zoomatshini zezi zilandelayo:
ukwakheka kweekhemikhali:
– Ikhabhoni (C): 1.40-1.60%
– Chromium (Cr): 11.00-13.00%
– Molybdenum (Mo): 0.50-1.10%
– Manganese (Mn): 0.20-0.60%
– Silicon (Si): 0.10-0.40%
Indlela yokuziphatha koomatshini:
Amandla okuqina: ≥1275 MPa
– Amandla esivuno: ≥1120 MPa
– Elongation: ≥15%
– Ukuqina: ≥321 HB
I-Hot forging die steel D7 inobunzima obuphezulu, amandla aphezulu, ukumelana nokunxiba kakuhle kunye nokuzinza kwe-thermal, kwaye ifanelekile kwi-mold molds, izixhobo zokubetha, izixhobo zokusika kunye nezinye izixhobo kunye neengxenye ezifuna amandla aphezulu kunye nokumelana nokunxiba.
| Uhlobo lwemveliso | Iimveliso | Ubungakanani | Iinkqubo | Hambisa iSimo |
|---|---|---|---|---|
| Amacwecwe / Amaxwebhu | Amacwecwe / Amaxwebhu | 0.08-200mm(T)*W*L | Ukuqulunqa, ukuqengqeleka okushushu kunye nokuqengqeleka okubandayo | I-Annealed, Isisombululo kunye nokuguga, i-Q + T, i-ACID-WASHED, i-Shot Blasting |
| Ibha yentsimbi | Ibha eRound, iFlat Bar, iSquare Bar | Φ8-1200mm*L | Ukuqulunqa, ukuqengqeleka okushushu kunye nokuqengqeleka okubandayo, Cast | Mnyama, ukujika okurhabaxa, ukudutyulwa, |
| Ikhoyili / Umtya | Ikhoyili yentsimbi /Intsimbi yentsimbi | 0.03-16.0x1200mm | I-Cold-Rolled & Hot-Rolled | I-Annealed, Isisombululo kunye nokuguga, i-Q + T, i-ACID-WASHED, i-Shot Blasting |
| Imibhobho / Imibhobho | Imibhobho engenamthungo / iityhubhu, imibhobho edityanisiweyo / iityhubhu | OD: 6-219mm x WT: 0.5-20.0mm | I-extrusion eshushu, i-Cold Drawn, i-Welded | I-Annealed, Isisombululo kunye nokuguga, i-Q + T, i-ACID-WASHED |
I-D7 die steel yintsimbi esebenza ngekhabhoni ephezulu-chromium ebandayo enokunganyangeki okugqwesileyo, ubulukhuni kunye nokumelana nobushushu, kwaye ifanelekile kwimveliso eyahlukeneyo kunye nezixhobo. Ezi zilandelayo zezinye zezona zinto zisetyenziswayo zentsimbi yesixhobo se-D7:
1. Isitampu sokuvelisa siyafa: I-D7 die steel inobunzima obuphezulu kunye nokumelana nokunxiba, kwaye ifanelekile kwimveliso ye-stamping dies, efana ne-punches kunye nezihlalo ze-punch.
2. Ukuvelisa izixhobo zokusika: Ubunzima kunye nokuxhatshazwa kwentsimbi ye-D7 mold mold kwenza kube yinto efanelekileyo yokuvelisa izixhobo zokusika, njengemimese, i-milling cutters, i-drills, njl.
3. Ukuvelisa ukusebenza okubandayo kuyafa: i-D7 die steel inokumelana nokunxiba okugqwesileyo kunye nokumelana nempembelelo, kwaye ifanelekile kwimveliso yokusebenza ebandayo efayo, njengokufa kwe-blanking, ukugoba kuyafa, njl.
4. Ukuveliswa komsebenzi oshushu kuyafa: i-D7 insimbi yokufa inokumelana nokushisa okuphezulu kwaye ifanelekile ukuvelisa umsebenzi oshushu uyafa, njengokufa koxinzelelo olushushu, ukubunjwa okushushu kuyafa, njl.
5. Ukuveliswa kwemfumba yeplastiki: I-D7 yentsimbi ye-mold ine-resistant resistant and corrosion resistance, kwaye ifanelekile ukwenza iimbumba zeplastiki, ezifana ne-injection molds, i-extrusion molds, njl.
Ngenxa yokuqina kwayo okugqwesileyo, ukumelana nokunxiba kunye nokumelana nobushushu, i-D7 die steel isetyenziswa kakhulu kwishishini lemveliso yokufa ukwenza iintlobo ezahlukeneyo zokufa kunye nezixhobo zokuphucula ukusebenza kakuhle kwemveliso kunye nomgangatho wemveliso.
I-RAYIWELL inokubonelela omnye umsebenzi oshushu okanye isixhobo esibandayo sentsimbi yentsimbi okanye ibha ejikelezileyo ngolu hlobo lulandelayo, siyayamkela iodolo yesiko ngokunjalo.
