I-China China Ibanga lesi-2 I-UNS R50400 Umkhiqizi Nomphakeli Wepuleti Lephepha le-Titanium | Ruiyi
Ishidi le-Titanium lithole umusa ezimbonini ezifana ne-aerospace, ukukhiqiza ugesi, i-petrochemical nezimoto. Inikeza amandla angaphezulu-aphezulu nesisindo esiphansi, ama-alloy amandla aqinile aphezulu ahlanganiswe nokudlulisa ukushisa okuphansi awenza afanelekele kakhulu uhla lwezinhlelo zokusebenza zobunjiniyela. Ishidi le-Titanium liyinto enhle kakhulu yokukhiqiza ivolumu ephezulu yezingxenye ngokufaka isitembu noma ukusika i-waterjet.
Ishidi le-Titanium nepuleti kunganikezwa ezindaweni eziningi ezihlukene zokuqeda. Ukubaluleka kokuqedwa kwengaphezulu kunqunywa kakhulu ukusetshenziswa kanye nokusondelana nesimo esiphelile njengoba ngokuvamile izindawo zemikhiqizo engase ziqedwe ngemva kokwenziwa kokugcina. Isimo esivamile sokunikezwa yi-anealed mill finish.
Sinikeza ama-surface finishes ahlukahlukene ngokuya ngosayizi nezimo zokuhlinzeka. Izinhlobo ezahlukene ze-surface finishes ziyi:
- Igayiwe
- Ipholishiwe
- I-Pickling (encishisiwe)
- Ibhulashi
- Kuqhume - Shot / Sand
Izimo zokuqeda nokunikezela eziholela ezindaweni ezihlukene azichazwanga ngokucacile kumazinga futhi ngenxa yalokho zincike kakhulu kumshini ngamunye kanye nezivumelwano ezingaphandle kwanoma yiziphi izindinganiso. Izinga le-ASTM B600 liyindinganiso eyisihluthulelo ekuhlinzekeni umhlahlandlela wokwehlisa nokuhlanzwa kwe-titanium ne-titanium alloys kodwa alichazi ukucwebezela, umbala noma ukuhwalala okufanele indawo ethile ibe nayo.
Material: CP titanium, Titanium alloy
Ibanga: Gr1, Gr2, Gr4, Gr5, Gr7, Gr9, Gr11, Gr12, Gr16, Gr23 njll
Usayizi: Ubukhulu: 0.3～5mm, Ububanzi: 400～3000mm, Ubude: ≤6000mm
Okujwayelekile: ASTM B265, AMS 4911, AMS 4902, ASTM F67, ASTM F136 njll
Isimo: I-Hot Rolled (R), I-Cold Rolled(Y), I-Annealed (M), Ukwelashwa kwesixazululo (ST)
Ishidi nepuleti le-Titanium kuvame ukusetshenziswa ekukhiqizeni namuhla, ngamamaki aziwa kakhulu angu-2 no-5.
Ibanga lesi-2 leTitanium
Ibanga lesi-2 yi-titanium emsulwa kwezohwebo esetshenziswa ezindaweni eziningi ezikhiqiza amakhemikhali futhi iyabanda. Ipuleti neshidi leBanga lesi-2 lingaba namandla okuqina aphezulu futhi libe ngaphezu kuka-40,000 psi.
Ibanga lesi-5 leTitanium
IBanga lesi-5 liyibanga le-aerospace futhi alikwazi ukwakheka okubandayo, ngakho lisetshenziswa kaningi lapho kungadingeki ukubunjwa. Ingxubevange ye-aerospace yeBanga lesi-5 izoba namandla okugcina eqinile futhi ibe ngaphezu kuka-120,000 psi.
Inkampani yethu ihlinzeka ngekhoyili ye-titanium neshidi le-titanium. Sinamashidi e-titanium amaningi esitokweni. Lokho kungasikwa ngosayizi abahlukene ngokwezidingo zekhasimende, kufinyeze kakhulu isikhathi sokulethwa.
Sihlinzeka ikakhulukazi ngeshidi le-titanium elimsulwa lamabanga e-Gr1, Gr2, Gr4; Ngeshidi le-titanium alloy, Sihlinzeka ngokuyinhloko nge-Gr5, Gr7, Gr9, Gr11, Gr12, Gr16, Gr23 namanye amabanga.
Isicelo
Isetshenziswa ekukhiqizeni isishintshi sokushisa, umbhoshongo, igedlela lokusabela.
Isetshenziselwa ukukhiqizwa kwensimbi eyinhlanganisela yensimbi.
Isetshenziswa embonini yethusi ye-electrolytic.
Isetshenziselwa ukukhiqiza i-titanium mesh.
| Inombolo ye-UNS. |
| Inombolo ye-UNS. | |||
| Gr1 | I-UNS R50250 | I-CP-Ti | Gr11 | I-UNS R52250 | I-Ti-0.15Pd |
| Gr2 | UNS R50400 | I-CP-Ti | Gr12 | I-UNS R53400 | Ti-0.3Mo-0.8Ni |
| Gr4 | I-UNS R50700 | I-CP-Ti | Gr16 | I-UNS R52402 | I-Ti-0.05Pd |
| Gr7 | I-UNS R52400 | I-Ti-0.20Pd | Gr23 | I-UNS R56407 | Ti-6Al-4V ELI |
| Gr9 | I-UNS R56320 | I-Ti-3Al-2.5V |
|
| |
Ukucaciswa
| Ibanga | Isimo | Ukucaciswa | ||
| Gr1,Gr2,Gr4,Gr5,Gr7,Gr9,Gr11, Gr12,Gr16,Gr23 | Okugoqiwe Okushisayo(R) I-Cold Rolled(Y) I-Annealed(M) Ukwelashwa kwesixazululo(ST) | Ubukhulu(mm) | Ububanzi(mm) | Ubude(mm) |
| 0.3-5.0 | 400-3000 | 1000-6000 | ||
Ukwakheka kwamakhemikhali
| Ibanga | Ukwakheka kwamakhemikhali, iphesenti lesisindo (%) | ||||||||||||
| C ≤ | O ≤ | N ≤ | H ≤ | Fe ≤ | Al | V | Pd | Ru | Ni | Mo | Ezinye Izinto Ubukhulu. ngamunye | Ezinye Izinto Ubukhulu. ingqikithi | |
| Gr1 | 0.08 | 0.18 | 0.03 | 0.015 | 0.20 | - | - | - | - | - | - | 0.1 | 0.4 |
| Gr2 | 0.08 | 0.25 | 0.03 | 0.015 | 0.30 | - | - | - | - | - | - | 0.1 | 0.4 |
| Gr4 | 0.08 | 0.25 | 0.03 | 0.015 | 0.30 | - | - | - | - | - | - | 0.1 | 0.4 |
| Gr5 | 0.08 | 0.20 | 0.05 | 0.015 | 0.40 | 5.5-6.75 | 3.5-4.5 | - | - | - | - | 0.1 | 0.4 |
| Gr7 | 0.08 | 0.25 | 0.03 | 0.015 | 0.30 | - | - | 0.12-0.25 | - | 0.12-0.25 | - | 0.1 | 0.4 |
| Gr9 | 0.08 | 0.15 | 0.03 | 0.015 | 0.25 | 2.5-3.5 | 2.0-3.0 | - | - | - | - | 0.1 | 0.4 |
| Gr11 | 0.08 | 0.18 | 0.03 | 0.15 | 0.2 | - | - | 0.12-0.25 | - | - | - | 0.1 | 0.4 |
| Gr12 | 0.08 | 0.25 | 0.03 | 0.15 | 0.3 | - | - | - | - | 0.6～ 0.9 | 0.2-0.4 | 0.1 | 0.4 |
| Gr16 | 0.08 | 0.25 | 0.03 | 0.15 | 0.3 | - | - | 0.04–0.08 | - | - | - | 0.1 | 0.4 |
| Gr23 | 0.08 | 0.13 | 0.03 | 0.125 | 0.25 | 5.5-6.5 | 3.5-4.5 | - | - | - | - | 0.1 | 0.1 |
Izici ezingokomzimba
| Ibanga | Izici ezingokomzimba | ||||||||
| Amandla aqinile Okuncane | Amandla esivuno (0.2%, offset) | Ukwelula kwe 50mm Ubuncane (%) | Ukuhlolwa kwe-Bend(Radius of Mandrel) | ||||||
| ksi | I-MPa | imiz | ubuningi | ＜1.8mm Ngo ukushuba | 1.8mm-4.57mm Ngo ukushuba | ||||
| ksi | I-MPa | ksi | I-MPa | ||||||
| Gr1 | 35 | 240 | 20 | 138 | 45 | 310 | 24 | 1.5T | 2T |
| Gr2 | 50 | 345 | 40 | 275 | 65 | 450 | 20 | 2T | 2.5T |
| Gr4 | 80 | 550 | 70 | 483 | 95 | 655 | 15 | 2.5T | 3T |
| Gr5 | 130 | 895 | 120 | 828 | - | - | 10 | 4.5T | 5T |
| Gr7 | 50 | 345 | 40 | 275 | 65 | 450 | 20 | 2T | 2.5T |
| Gr9 | 90 | 620 | 70 | 483 | - | - | 15 | 2.5T | 3T |
| Gr11 | 35 | 240 | 20 | 138 | 45 | 310 | 24 | 1.5T | 2T |
| Gr12 | 70 | 483 | 50 | 345 | - | - | 18 | 2T | 2.5T |
| Gr16 | 50 | 345 | 40 | 275 | 65 | 450 | 20 | 2T | 2.5T |
| Gr23 | 120 | 828 | 110 | 759 | - | - | 10 | 4.5T | 5T |
Ukubekezela (mm)
| Ubukhulu | Ukubekezelela ububanzi | |
| 400-1000 | ＞1000 | |
| 0.3-0.5 | ±0.05 | ±0.05 |
| 0.5-0.8 | ±0.07 | ±0.07 |
| 0.8-1.1 | ±0.09 | ±0.09 |
| 1.1-1.5 | ±0.11 | ±0.13 |
| 1.5-2.0 | ±0.15 | ±0.16 |
| 2.0-3.0 | ±0.18 | ±0.20 |
| 3.0-4.0 | ±0.22 | ±0.22 |
| 4.0-5.0 | ±0.35 | ±0.35 |
Ukuhlola
Ukuhlolwa kokwakheka kwamakhemikhali
Ukuhlolwa kwezakhiwo zomzimba
Ukuhlolwa kokukhubazeka kokubukeka
Ukutholwa kwamaphutha e-Ultrasonic
Ukuhlolwa kwamanje kwe-Eddy
Ukupakisha
Ukuze ugweme amashidi e-titanium abe nanoma yikuphi ukungqubuzana kwezokuthutha noma umonakalo, ngokuvamile asongwe nge-pearl ukotini (i-polyethylene enwebekayo), abese epakishwa esikhwameni sokhuni ukuze alethwe.
