I-China DC01 Ikhoyili yensimbi egoqiwe ebandayo DIN EN 10130 10209 DIN 1623 Umkhiqizi Nomphakeli | Ruiyi

I-China DC01 Ikhoyili yensimbi egoqiwe ebandayo DIN EN 10130 10209 DIN 1623 Umkhiqizi Nomphakeli | Isithombe Esifakiwe sika-Rui

Incazelo emfushane:

IZINSIMBI EZINGAMAZA ISHIDI KANYE NEKHOyili – (DC01 I-BS EN 10130:2006)

Insimbi egoqiwe ebandayo, (okuvame ukubizwa ngokuthi Amakhaza ancishisiwe noma CR), ingumkhiqizo wekhabhoni ephansi, okhiqizwa kusetshenziswa eluhlaza impahla njenge-coke namalahle at insimbi izigayigayi emhlabeni wonke.

Insimbi ye-DC01 (1.0330 impahla) iyikhabhoni ephansi ejwayelekile yaseYurophu insimbi umkhiqizo oyisicaba wokwakheka okubandayo. … Ngaphezu kwalokho, lokhu insimbi ibuye isetshenziswe ngaphansi kwezimo ze-electrogalvanizing. Ukuqokwa kwe- insimbi kuyinto DC01+ZE (noma 1.0330+ZE), futhi indinganiso yi-EN 10152

Thumela i-imeyili kithi

Imininingwane Yomkhiqizo

Omaka bomkhiqizo

Insimbi egoqwe ebandayo ngokuya nge-DIN EN 10130, 10209 kanye ne-DIN 1623
Omunye wabahlinzeki abahamba phambili be-Mild Steel Strip e-China, ohlinzeka nge-DC01 ku-DIN EN 10139, I-Cold Steel Strip engagqunyiwe engagcotshiwe ukuze yakheke abandayo, BS 1449 CS1, DC03 kuya ku-DIN EN 10139, I-Cold Steel Strip ebandayo egoqiwe engafakwanga, i-BS ebandayo 1449 CS1/CS3 kanye ne-DC06 kuya ku-DIN EN 10139, I-Cold Steel Strip engagqokiwe epholile yokwenza okubandayo, i-BS 1449 CS4

Idatha yobuchwepheshe

Insimbi egoqwe ebandayo ngokuya nge-DIN EN 10130, 10209 kanye ne-DIN 1623

Ikhwalithi	Isiqondiso sokuhlola	Okubalulekile-No.	Iphoyinti lesivuno Rp0,2 (MPa)	Amandla e-Tensile Rm (MPA)	I-Elongation A80 (ku-%) iminithi.	I-r-Value 90° min.	n-Inani 90° min.	Incazelo endala
DC01	Q	1.0330	≤280	270 – 410	28			St 12-03
DC03	Q	1.0347	≤240	270 – 370	34	1,30		St 13-03
DC04	Q	1.0338	≤210	270 – 350	38	1,60	0,18	St 14-03
DC05	Q	1.0312	≤180	270 – 330	40	1,90	0,20	St 15-03
DC06	Q	1.0873	≤170	270 – 330	41	2,10	0,22
DC07	Q	1.0898	≤150	250 - 310	44	2,50	0,23

Ikhwalithi	Isiqondiso sokuhlola	Okubalulekile-No.	Iphoyinti lesivuno Rp0,2 (MPa)	Amandla e-Tensile Rm (MPA)	I-Elongation A80 (ku-%) iminithi.	I-r-Value 90° min.	n-Inani 90° min.
I-DC01EK	Q	1.0390	≤270	270 – 390	30
I-DC04EK	Q	1.0392	≤220	270 – 350	36
I-DC05EK	Q	1.0386	≤220	270 – 350	36	1,50
I-DC06EK	Q	1.0869	≤190	270 – 350	38	1,60
I-DC03ED	Q	1.0399	≤240	270 – 370	34
I-DC04ED	Q	1.0394	≤210	270 – 350	38
DC06ED	Q	1.0872	≤190	270 – 350	38	1,60

Ikhwalithi	Isiqondiso sokuhlola	Okubalulekile-No.	Iphoyinti lesivuno Rp0,2 (MPa)	Amandla e-TensileRm (MPA)	I-Elongation A80 (ku-%) iminithi.	I-DIN 1623 T2 (endala)
I-S215G	Q	1.0116G	≥215	360 - 510	20	St 37-3G
I-S245G	Q	1.0144G	≥245	430 - 580	18	St 44-3G
I-S325G	Q	1.0570G	≥325	510 - 680	16	St 52-3G

Insimbi egoqiwe ebandayo nayo iyingxenye yephothifoliyo yomkhiqizo wethu. Insimbi egoqiwe ebandayo inhle kakhulu ekwakhekeni okubandayo. Leli qembu lomkhiqizo labela amabanga DC01 ku-DC07, DC01EK ku-DC06EK, DC03ED ku-DC06ED kanye ne-S215G ku-S325G.

Amabanga ahlukaniswa ngokwesilinganiso esiphezulu samandla esivuno avumelekile futhi angahlukaniswa ngale ndlela elandelayo.
DC01 – Leli banga lingasetshenziselwa umsebenzi wokwakha olula, isibonelo, ukugoba, ukugqamisa, ukwenza ubuhlalu nokudonsa kuyasetshenziswa.
DC03 – Leli banga lifanele ukwenza izimfuneko ezifana nokudweba Okujulile kanye namaphrofayela anzima afanelekile.
DC04 – Le khwalithi ifanele izimfuneko zokuguga okuphezulu.
I-DC05 – Leli banga le-thermoforming lifanele izimfuneko eziphezulu zokwenza.
DC06 – Le khwalithi yomdwebo ojulile okhethekile ifanele izimfuneko eziphakeme kakhulu zokuguqulwa.
DC07 – Le khwalithi yomdwebo ejule kakhulu ifanele izimfuneko zokuwohloka ngokwedlulele.

Amabanga anamethiwe
Amabanga ensimbi i-DC01EK, DC04EK kanye ne-DC06EK afanele ungqimba olulodwa oluvamile noma ungqimba olukabili.

Amamaki ensimbi i-DC06ED, DE04ED kanye ne-DC06ED afaneleka ukuqinisa i-enamelling eqondile kanye nokwenziwa kwe-enamelling ngokwendlela yezendlalelo ezimbili / eyodwa yokudubula kanye nokusetshenziswa okukhethekile kwe-enamelling enezendlalelo ezimbili ukuze kube nokuhlanekezela okuphansi kwe-enamelling.

Uhlobo lobuso

Ubuso A
Amaphutha anjengama-pores, ama-grooves amancane, ama-warts amancane, ukuklwebheka okuncane kanye nokushintsha umbala okungaphazamisi ikhono lokubunjwa kabusha nokunamathela kuma-surface coatings kuvunyelwe.

Ubuso B
Uhlangothi olungcono kufanele lungabi nasici ukuze ukubukeka okulinganayo kokuqedwa kwekhwalithi noma i-electrolytically coating ingasebenzi. Olunye uhlangothi kufanele okungenani luhlangabezane nezidingo zohlobo olungaphezulu A.

Ukuqedwa kobuso
Indawo engaphezulu ingase ibe bushelelezi, ibe buthuntu noma ibe mahhadlahhadla. Uma ingekho imininingwane enikeziwe lapho ku-oda, indawo engaphezulu izolethwa ngokuqedwa kwe-matt. Izindawo ezine eziqediwe ezisohlwini zihambisana namanani aphakathi nendawo kuthebula elilandelayo futhi kufanele ahlolwe ngokuvumelana ne-EN 10049.

Ukuqedwa kobuso	isici	Ukuqedwa kwendawo okumaphakathi (inani lomngcele: 0,8mm)
Ifulethi elikhethekile	b	I-Ra ≤ 0,4 µm
isicaba	g	I-Ra ≤ 0,9 µm
Math	m	0,60 µm ˂ Ra ≤ 1,9 µm
rough	r	I-Ra ≤ 1,6 µm